accod
Member
- Joined
- Mar 5, 2012
- Messages
- 4
- Reaction score
- 0
- Points
- 0
- Age
- 54
- My Satellite Setup
- DM800se
- My Location
- Slovakia
Hi,
I'm having trouble getting a new unpaired cs-link card (caid=0666) working is oscam and was hoping for some help. Nothing to do with cs, this is a valid card that I want to use myself in a single receiver so I think that's ok to discuss here?
The card gets detected correctly in my dreambox 800se but is complaining of an incorrect cam key set regardless of if these are left blank or all zeros. My sky card works fine so I know oscam is partially working.
It doesn't help that I don't understand the language but a Czech forum (with the help of google translate!) suggests it should work but I've tried oscam-svn6465-mips-tuxbox-webif with their posted config and have the same key problem:
_http://www.forum.satdigitalne.cz/viewtopic.php?f=286&t=9208
Being new to oscam, I'm probably missing something obvious but I've tried for days on this. Before I go and post in English on a Czech forum, can anyone here help me with getting this working?
The logs show:
reader upper initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=500)
upper card detected
ATR: 3B xxx
Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
Hist. Bytes: IRDETO ACS V6.0
detect irdeto card
WARNING: ACS57 card can require the CamKey from config
caid: 0666, acs: 0.06, country code: CZE
providers: 4, ascii serial: xxx, hex serial: xxx, hex base: 11
[reader-irdeto] You have a bad Cam Key set
card system not supported
Normal mode failed, reverting to Deprecated Mode
ATR: 3B xxx
Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
Hist. Bytes: IRDETO ACS V6.0
detect irdeto card
WARNING: ACS57 card can require the CamKey from config
caid: 0666, acs: 0.06, country code: CZE
providers: 4, ascii serial: xxx, hex serial: xxx, hex base: 11
[reader-irdeto] You have a bad Cam Key set
card system not supported
card initializing error
My oscam.server contains:
[reader]
label = upper
enable = 1
protocol = internal
device = /dev/sci1
detect = cd
mhz = 500
cardmhz = 500
caid = 0666
ident =
services =
group = 2
emmcache = 1,3,15
lb_weight = 100
cccreshare = 3
audisabled = 0
force_irdeto = 1
camkey = 0000000000000000
camkeydata = 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Many thanks.
I'm having trouble getting a new unpaired cs-link card (caid=0666) working is oscam and was hoping for some help. Nothing to do with cs, this is a valid card that I want to use myself in a single receiver so I think that's ok to discuss here?
The card gets detected correctly in my dreambox 800se but is complaining of an incorrect cam key set regardless of if these are left blank or all zeros. My sky card works fine so I know oscam is partially working.
It doesn't help that I don't understand the language but a Czech forum (with the help of google translate!) suggests it should work but I've tried oscam-svn6465-mips-tuxbox-webif with their posted config and have the same key problem:
_http://www.forum.satdigitalne.cz/viewtopic.php?f=286&t=9208
Being new to oscam, I'm probably missing something obvious but I've tried for days on this. Before I go and post in English on a Czech forum, can anyone here help me with getting this working?
The logs show:
reader upper initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=500)
upper card detected
ATR: 3B xxx
Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
Hist. Bytes: IRDETO ACS V6.0
detect irdeto card
WARNING: ACS57 card can require the CamKey from config
caid: 0666, acs: 0.06, country code: CZE
providers: 4, ascii serial: xxx, hex serial: xxx, hex base: 11
[reader-irdeto] You have a bad Cam Key set
card system not supported
Normal mode failed, reverting to Deprecated Mode
ATR: 3B xxx
Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
Hist. Bytes: IRDETO ACS V6.0
detect irdeto card
WARNING: ACS57 card can require the CamKey from config
caid: 0666, acs: 0.06, country code: CZE
providers: 4, ascii serial: xxx, hex serial: xxx, hex base: 11
[reader-irdeto] You have a bad Cam Key set
card system not supported
card initializing error
My oscam.server contains:
[reader]
label = upper
enable = 1
protocol = internal
device = /dev/sci1
detect = cd
mhz = 500
cardmhz = 500
caid = 0666
ident =
services =
group = 2
emmcache = 1,3,15
lb_weight = 100
cccreshare = 3
audisabled = 0
force_irdeto = 1
camkey = 0000000000000000
camkeydata = 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Many thanks.