DAB+ on 1 West (Generic Stream)

[andimik]

I expect that MPE works for all muxes and all cards (as long as they can handle DVB-S2, except for 23.5E)

The only problem is still unsolved, NRK needs to be addressed by IP and Port, rather than MIS (which is the same for all Norwegian muxes).

 

[satesco]

What's the syntax with digris-edimcast2edi for DAB+ RAI, which stream works directly on a console on 12564 V,35300,2/3, stream 11?

 

[andimik]

This is neither MPE nor GSE. Please use the eti-tools.

 

[andimik]

Has anyone tried to send UDP to the internet? In my country I shouldn't do it because of very strict copyright laws.

 

[iandoh]

Has anyone tried to send UDP to the internet? In my country I shouldn't do it because of very strict copyright laws.

Yeah, works fine. I've set up a twin tuner spare USB tuner to do the UK DAB muxes from 9e in Bulgaria so I can use them in my car when driving.

 

[andimik]

Please try now, the syntax should be

mis:ip:port

As far as I understood, you just set one unique parameter, so please try 0:239.199.2.1:0 beside of 171:239.199.2.1:1234

I tried and failed to activate DAB+ NRK with `digris-edimcast.` Of course, I couldn't find the correct command line.
For now, this DAB works as usual via `pts2bbf | bbfedi2eti`

Missing IP and Port for Parameter -G · Issue #3 · digris/digris-edi-zmq-bridge

According to a post in a forum there is no chance to use digris-edimcast2edi for Norwegian NRK and Riks Mux on 0.8W as the -G does not accept an IP Address and Port, as all 8 streams have the same ...

github.com

 

[satesco]

I entered the parameter you asked for, 0:239.199.2.1.1:0, but nothing happened. What does it represent?
It seems that the syntax is not correct because I didn't enter the suitable parameter.
Which is the PID mux?, where F is PID:IP: Port, and G is MIS.
So, how do you arrange the three elements?

-sat@ubu:~$ digris-edimcast2edi -m 127.0.0.1 -p 5000 -l 8901 -F 0:239.199.2.1:0 171:239.199.2.1:1234
DIGRIS-EDIMCAST2EDI 0.6.0 starting up
Developed for Opendigitalradio by digris: Partner dab+

-
sat@ubu:~$ digris-edimcast2edi -m 127.0.0.1 -p 5000 -l 8901 -G 0:239.199.2.1:0 -F 171:239.199.2.1:1234
DIGRIS-EDIMCAST2EDI 0.6.0 starting up
Developed for Opendigitalradio by digris: Partner dab+

What is the correct command line for digris-edimcast2edi?

 

[andimik]

You have several errors in your syntax. NRK is GSE, so you need

-G 171:[NRK IP]:1234

Please also try

-G 0:[NRK IP]:0

I cannot test it as I don't have a signal any more.

 

[satesco]

You have several errors in your syntax. NRK is GSE, so you need

-G 171:[NRK IP]:1234

Please also try

-G 0:[NRK IP]:0

I cannot test it as I don't have a signal any more.

Because the signal is at its limit at this time of day, NRK is breaking.
But more importantly, the stream is running with the latest syntax (G 171).
It doesn't work with -G 0.
I will try again when I have a stronger signal on this mux.

 

[andimik]

Thanks! Glad to hear that.

 

[andimik]

Does this work as well?

-G 171:[Ip]:0

If not, then one has to provide all three values.

 

[satesco]

Does this work as well?

-G 171:[Ip]:0

If not, then one has to provide all three values.

Even if the signal is not generous, this G doesn't work; at least it gives a diagnosis.

 

[satesco]

I tested again with the command -G 171:[Ip]:0, and at a slightly better signal, around 8dB, digris-edicast2edi started.
The problem is that, at this SNR, the stream has errors and scrolls fast, causing jerks and interruptions.

I then checked with the "classic" command, /bbframe-tools/pts2bbf | bbfedi2eti, and as you see below, the NRK stream runs fine and is stable at the same SNR.

So, the signal is a deciding factor in whether the stream will work reliably. I hope the signal will be stronger after the Outages next month, and the tests will be more conclusive.

Those in northern Europe could check DAB+ NRK with the digris-edicast2edi command, as the signal is on the Nordic spot.
I can't believe I am the only one receiving this spot; even more so, it doesn't cover my area by footprint.

 

[satesco]

7.0E_12567 V,17015,2/3,
DAB+ German Mux(Bayern) works with digris-edicast22edi with the command, besides tune-s2 and dvbstream: "digris-edimcast2edi -m 127.0.0.0.1 -p 5000 -l 8901 -F 101:239.16.242.17:60017"

 

[andimik]

Yes, this is MPE. There was never a problem.