blademedia
Member
- Joined
- Jul 29, 2016
- Messages
- 1,941
- Reaction score
- 1,920
- Points
- 113
- My Satellite Setup
- Sky
- My Location
- UK
don't make them like they used to
Bonneville T120 | Triumph Motorcycles
my last bike long time now nearly killed myself not owned one since keep saying to wife I get a cruiser she says no bad enough in car
How is it possible to kill oneself on a Bantam ?
(though on the video, the yoke clamps won't stop the handlebars from turning under the enormous acceleration or braking power).
motor part nearly finished need to grind small amount from motor for it to seat correctly
View attachment 99248 View attachment 99249 View attachment 99250
You should stick a patient on it, and start selling them.
As no one seems to make decent h2h motors(apart from you)
Whats wrong using the endswitches in the actuator motor you use to drive the gearbox ?thinking ahead on this build checking stops only get 2.5 resolution's on the output shaft stop to stop not enough few options easy option pull them out of motor position them above motor + lug on slewing ring to activate stop marked red
bought more steel 4mm and 6mm thickness 6mm will go yellow line act as counter balance could also fill ends with lead for extra weight if needed
View attachment 99274
View attachment 99275
Whats wrong using the endswitches in the actuator motor you use to drive the gearbox ?
easy option pull them out of motor position them above motor
I mean to ask , WHY not use them INSIDE that actuator motor housing ?
checking stops only get 2.5 resolution's on the output shaft stop to stop not enough few options easy option
""checking stops only get 2.5 resolution's on the output shaft stop to stop""
Sorry blademedia , I dont understand what you wrote there
""checking stops only get 2.5 resolution's on the output shaft stop to stop""
I got my hand on a few very heavy worm gear boxes , managed to make it play free .
They use to be on truck trailors , loading bricks packages with a weight of more than 2000 kg
Try to make H2H rotor from it for BIG dishes .
Now I'm searching for motors .