DM600, Pli Jade3 E1 and motorized setup

[cryo75]

Hi all,

I've installed a motor (Clarke-Tech HH390) and I first set up my first receiver Topfield 5500PVR using USALS. Took me about 5mins. Rotating to different sats is fast, ie. as expected.

Then I plugged in and setup my DM600 with Jade3 E1 and CCCam 2.1.4. Didn't work. So I did the following:

1. Delete all bouquets, channels and satellites from the box.
2. Edited satellites.xml with Dreamboxedit and left only 9E, 13E, 19.2E & 28.2E. 9E is my reference satellite.
3. Uploaded everything, selected Rotor setup and ticked Goto XX to use USALS, and scanned all 4 satellites. Got all available services from all sats.

But now the problems start....

When I change channels on the same satellite, I just get a black screen. When I change satellites, it says 'Please waiting while turning motor to xx' and it stays like for a very long time and the screen remains black. Once in a while I get some channel.


Anybody has ideas or suggestions??

Thanks,
Cryo

 

[ihatedeskjets]

This is similar to my problems see here http://www.satellites.co.uk/forums/...tech/183628-strange-results-28-2e-28-5-e.html

I thought I had cured it with help but the problem has returned.

Try to identify the channels it's struggling with, take the rotor out of the circuit, does it do it on all sats or just the one like mine ?