EMP Centauri P 168-W V2 & DREAMBOX

lamaislam

Member
Joined
May 7, 2009
Messages
4
Reaction score
0
Points
0
Age
45
My Satellite Setup
Ipbox 350
My Location
Italy
I purchased the disecq EMP Centauri 8x1 P 168-W V2 but I can not configure it for the Dreambox.
I connected the lnb as follows:
IN 1 ---- Motor Stab
IN 2 ---- Hotbird
IN 3 ---- Astra
IN 4 ---- Hispasat
IN 5 ---- Turkisat

I followed the directions on the DEC proposed by various users on various topics including the forum. The result is that the engine is working but still no signal on the parables.

Someone who uses the same disecq dreambox and connecting motor and more parables fixed can you please post your configuration?
 

lamaislam

Member
Joined
May 7, 2009
Messages
4
Reaction score
0
Points
0
Age
45
My Satellite Setup
Ipbox 350
My Location
Italy
tried this configuration:

LNB0- Motor
Toneburst= Niente-Mod.Diseqc=1.2-Param.Diseqc=A/A-Ripet.Diseqc=Niente-Uncommited Swicth=Entrata 1, no selection 6/7/8.
Swicth Centauri 8X1 collegamento a IMPUT 1.

LNB1-Hotbird
Toneburst=niente-Mod.Diseqc=1.1-Param.Diseqc=A/B-Ripet.Diseqc=2-Uncommited Swicth=Entrata 1 - 6/7/8 no selection
Swicth Centauri 8X1 collegamento a Imput 2.

LNB2- Astra
Toneburst=niente-Mod.Diseqc=1.1-Param.Diseqc=B/A-Ripet.Diseqc=2-Uncommited Swicth=Entrata 1 - 6/7/8 no selection.
Swicth Centauri 8X1 collegamento a Imput 3.

LNB3-Hispasat
Toneburst=niente-Mod.Diseqc=1.1-Param.Diseqc=B/B-Ripet.Diseqc=2-Uncommited Swicth=Entrata 1
6/7/8 no selection.
Swicth Centauri 8X1 collegamento a Imput 4.

LNB4-Turkisat
Toneburst=niente-Mod.Diseqc=1.1-Param.Diseqc=A/A-Ripet.Diseqc=2-Uncommited Swicth=Entrata 2
6/7/8 no selection.
Swicth Centauri 8X1 collegamento a Imput 5.

The motor works, but I have not fixed the signal
 

Analoguesat

Administrator
Staff member
Joined
Jul 26, 2003
Messages
51,098
Reaction score
11,557
Points
113
Location
Scottish Borders
My Satellite Setup
TM 5402HD
Sky+ UK.
My Location
Scottish Borders
To start with disconnect the motor and ignore it for now. See if you can get the fixed dishes working.
 

Robbo

Retired Mod
Joined
May 17, 2007
Messages
6,424
Reaction score
5
Points
38
Age
57
Website
www.mbcsatellites.co.uk
My Satellite Setup
TM6800HD, TM1000, TM600 Linux,TM2200 motor, Channel Master 1.2m motorised, TD110 dish Meter=Satlook Micro+G2 NIT
My Location
Gravesend,Kent,UK
Diseqc 1.0 switches don't always work with motors. Yet you have used Diseqc1.0 to switch between the motor and three of the other LNBs.

Might be worth a try using the uncommitted (diseqc1.1) for switching between motorised and fixed.

i.e

uncommitted 2 ->motor

uncomitted 1 -> Fixed LNBS via Diseqc 1.0 (AA AB BA B:cool:
 

lamaislam

Member
Joined
May 7, 2009
Messages
4
Reaction score
0
Points
0
Age
45
My Satellite Setup
Ipbox 350
My Location
Italy
ok...work.

Solution:
Motor LNB0 Diseqc 1.2 A/A Uncommited Entrata 1
Hotbird LNB1 Diseqc 1.1 A/B Uncommited Entrata 2
Astra LNB2 Diseqc 1.1 B/A Uncommited Entrata 3
Hispasat LNB3 Diseqc 1.1 B/B Uncommited Entrata 4
Turkisat LNB4 Diseqc 1.1 A/A Uncommited Entrata 5

Thank's ;)
 
Top