Jaeger 1224 Elevation Bolt ?

[Captain Jack]

I'd be interested as well in a couple of these bolts. Have a few 1224s in various states of disrepair.

Maybe also the Channel Master LNB holder, which seems popular.

 

[moonbase]

Rima,

It looks like myself and Captain Jack (CJ) will order enough elevation bolts to use up a 1 metre length of INOX ?
Can you please let us know if this is workable?

I think it should be possible to get at least 4 elevation bolts from a 1 metre length of INOX?
If that is the case, CJ could have two and I will take two, if it is possible to get five, I will take three, subject to CJ being OK with that?

 

[RimaNTSS]

Will sort out those eye-bolts. Just need to think better way how to make the eyes. Should I also look for M16 INOX nuts and washers, or you will get them locally?

 

[moonbase]

Will sort out those eye-bolts. Just need to think better way how to make the eyes. Should I also look for M16 INOX nuts and washers, or you will get them locally?

I think we can probably source them locally.

 

[RimaNTSS]

The length of the eye-bolt for Jaeger is 18cm. In fact, I have found out-of shelve 16mm INOX eye-bolts online, but the maximum size of them was 160mm. So, got the 16mm thread rode, cut it in pieces. From 30mm bar fabricated the eyes. Will weld them together tomorrow. Also got the nuts and washers to have whole sets available.

 

[itchybag]

The length of the eye-bolt for Jaeger is 18cm. In fact, I have found out-of shelve 16mm INOX eye-bolts online, but the maximum size of them was 160mm. So, got the 16mm thread rode, cut it in pieces. From 30mm bar fabricated the eyes. Will weld them together tomorrow. Also got the nuts and washers to have whole sets available. View attachment 158195

160mm will be long enough for alot of locations. how much exposed thread is on yours in your location?

 

[RimaNTSS]

160mm will be long enough for alot of locations. h

Most likely, 160mm will be enough for most of the locations.

 

[itchybag]

Most likely, 160mm will be enough for most of the locations.

i cant see there being anywhere north enough to run out of thread

 

[RimaNTSS]

Bolts are ready. Will send 2 of them to CJ. Another 2 will go to @moonbase. 1 is left as spare.

 

[moonbase]

Looking good Rima.
I will take three if there is a spare one?

Can you please PM me the payment details and I will flash over some yoyos (€'s)

 

[Beli1910]

A master is a master. Nicely done.

 

[RimaNTSS]

Can you please PM me

PMed

 

[moonbase]

PMed

Not received a PM ?
Did you add on to an old PM, I may have deleted some of the older PM's?