Jaeger 1224 restoration

I

itchybag

Regular Member
Joined
Jan 10, 2016
Messages
195
Reaction score
56
Points
28
Age
44
My Satellite Setup
1.1 stab motor with VU+ SOLO 4k, dm800, prof 7500
My Location
earth
started stripping down after soaking for a few days, think a grinder might be needed for the top plate bolts.

will these thread hammer out in any direction?1728820932471.jpg1728820932436.jpg
 
I

itchybag

Regular Member
Joined
Jan 10, 2016
Messages
195
Reaction score
56
Points
28
Age
44
My Satellite Setup
1.1 stab motor with VU+ SOLO 4k, dm800, prof 7500
My Location
earth
ive also removed the bottom nut from the swing bolt. is the only thing holding that inplace now corrosion?

the bottom plate came off easy also. the top plate though, the previous owner has already sheered 1 bolt off.

edit i just sheered the other 2 off so at least the top and bottom plates are off.
 
Last edited:
anto@

anto@

Regular Member
Joined
Oct 30, 2015
Messages
329
Reaction score
365
Points
63
Age
60
My Satellite Setup
dish 150 4 feed ku c lin c circ ka tbs 6925 tbs 5280
My Location
italy
take a hammer and hit it until it comes out then replace everything with a stainless steel bar and you will see that you will no longer have problems
as I had done in my modified 1224 EL
 
I

itchybag

Regular Member
Joined
Jan 10, 2016
Messages
195
Reaction score
56
Points
28
Age
44
My Satellite Setup
1.1 stab motor with VU+ SOLO 4k, dm800, prof 7500
My Location
earth
2 of the top plate bolts that sheered may come out with a bit of heat and some mole grips, the other is flush so will have to be drilled.
 
I

itchybag

Regular Member
Joined
Jan 10, 2016
Messages
195
Reaction score
56
Points
28
Age
44
My Satellite Setup
1.1 stab motor with VU+ SOLO 4k, dm800, prof 7500
My Location
earth
anyone got the measurements of the 3 threaded bars, i should have checked yesterday but didnt
 
Top