Lucuna Battery Connector

remlap

remlap

Specialist Contributor
Joined
Aug 21, 2004
Messages
2,332
Reaction score
898
Points
113
Age
37
My Satellite Setup
Gibertini 104cm motorised dish with a Technomate 5402 HD CI+ and TBS 6925 + Gibertini 90cm with 9E 13E 19.2E and 28.2/5E with a Hauppauge WinTV NOVA-HD-S2 Media Centre PC and Pure EVOKE Flow Radio + 100cm Channel Master with 2 LNBs at 24.5W and 30W
My Location
Wales
I am looking to buy a Lucuna Battery Connector like the one in the photo below.

Any suggestions on places to buy, and do I need a crimping tool to put the connector on or can it be soldered?

Thanks
 

Attachments

  • 2eyyszo.jpg
    2eyyszo.jpg
    2.8 KB · Views: 23
Robbo

Robbo

Retired Mod
Joined
May 17, 2007
Messages
6,424
Reaction score
5
Points
38
Age
57
Website
www.mbcsatellites.co.uk
My Satellite Setup
TM6800HD, TM1000, TM600 Linux,TM2200 motor, Channel Master 1.2m motorised, TD110 dish Meter=Satlook Micro+G2 NIT
My Location
Gravesend,Kent,UK
I normally get them from RS, but you need an account.

Maplin appear to sell them, but there's no photo on their web page.

The ones I use are crimp on, but you can bend over the tabs with small pliers, and stick some solder on for good measure.

Another place that sells ythem is Rapid Electronics-

2.54mm KK PCB Connectors
 
remlap

remlap

Specialist Contributor
Joined
Aug 21, 2004
Messages
2,332
Reaction score
898
Points
113
Age
37
My Satellite Setup
Gibertini 104cm motorised dish with a Technomate 5402 HD CI+ and TBS 6925 + Gibertini 90cm with 9E 13E 19.2E and 28.2/5E with a Hauppauge WinTV NOVA-HD-S2 Media Centre PC and Pure EVOKE Flow Radio + 100cm Channel Master with 2 LNBs at 24.5W and 30W
My Location
Wales
Thanks for the reply, sorry for taking so long to get back to you.
 
Top