2old4this
Honorary Admin
- Joined
- Jan 1, 1999
- Messages
- 1,658
- Reaction score
- 0
- Points
- 0
- My Location
- Cloud Cuckoo Land
Something new again - a user-programmable multi-encryption CI CAM.
See here:
http://www.sat4all.com/nl_ubb/ultimatebb.php?ubb=get_topic&f=1&t=001441
Includes link with files:
http://www.petran.20m.com/
This info from Dutch sat4all board; admin is stating that he has the thing working in his Topfield receiver (he is beta-tester for Topfield). He reports Irdeto/Betacrypt & Mediaguard("seca") are working using the Gammacrypt beta firmware. He also says that Polish contacts are claiming to have a Sky Videoguard emulation under development for that CAM (but that remains to be seen...)
It will cost about €200 plus about €30 for a special programming device that allows the CAM to be programmed via the serial port of a PC (CAM fitted in the receiver; programmer inserted into the CAM and connected via RS232 to PC).
And note: this is NOT the universal CAM that recently appeared but which can not be programmed by the user and for which only Mediaguard firmware has so far appeared.
More discussion & news (in German) here:
http://64.65.62.84/ubb/Forum13/HTML/000523.html
http://www.boxcracker.to/portal/
http://www.boxcracker.to/nuke/html/ci/
Buy it here:
http://www.visoduck.com/
Watch this space...
2old (just passing through...)
See here:
http://www.sat4all.com/nl_ubb/ultimatebb.php?ubb=get_topic&f=1&t=001441
Includes link with files:
http://www.petran.20m.com/
This info from Dutch sat4all board; admin is stating that he has the thing working in his Topfield receiver (he is beta-tester for Topfield). He reports Irdeto/Betacrypt & Mediaguard("seca") are working using the Gammacrypt beta firmware. He also says that Polish contacts are claiming to have a Sky Videoguard emulation under development for that CAM (but that remains to be seen...)
It will cost about €200 plus about €30 for a special programming device that allows the CAM to be programmed via the serial port of a PC (CAM fitted in the receiver; programmer inserted into the CAM and connected via RS232 to PC).
And note: this is NOT the universal CAM that recently appeared but which can not be programmed by the user and for which only Mediaguard firmware has so far appeared.
More discussion & news (in German) here:
http://64.65.62.84/ubb/Forum13/HTML/000523.html
http://www.boxcracker.to/portal/
http://www.boxcracker.to/nuke/html/ci/
Buy it here:
http://www.visoduck.com/
Watch this space...
2old (just passing through...)