Help Required Motorised system fine tuning

ozumo

te wo tsuite
Staff member
Joined
May 26, 2020
Messages
5,312
Reaction score
2,708
Points
113
My Satellite Setup
Raven mk2 zone 2 x4, Channel Master: 90cm x3, 1.2m x2, 1.8m PF. CM polar mount x2, Az/El x3.
My Location
South Durham
What I am noticing, and it's prevelant on 28.2e is the dish needs more skew it seems.

If I skew the LNB when at 28.2 the quality 11264H goes up from 67% to 78%.

What is weird is 11126V is at 80% with the skew at zero.

Unfortunately skewing 28.2e has a negative impact on the other sats like 16e,13e and 1w.
This is due to the skew offset I mentioned in post #3.
 

cwsat

Member
Joined
Sep 27, 2022
Messages
379
Reaction score
122
Points
43
My Satellite Setup
Gibertini 85cm / Dragonsat 3000 motor / Inverto Black Ultra LNB
My Location
Midlands
This is due to the skew offset I mentioned in post #3.
Need to try and find the sweet spot where the skew positively impacts 28.2 but not to the detriment of the other sats.
 

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
36,055
Reaction score
8,742
Points
113
Age
60
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
Nothing on that TP or 11785V.
Then those are the ones you should be trying to improve on that satellite.
What size dish are you using ?
 

cwsat

Member
Joined
Sep 27, 2022
Messages
379
Reaction score
122
Points
43
My Satellite Setup
Gibertini 85cm / Dragonsat 3000 motor / Inverto Black Ultra LNB
My Location
Midlands

a33

Specialised Contributor
Joined
Sep 24, 2009
Messages
1,332
Reaction score
759
Points
113
Age
64
My Satellite Setup
XSAT410
Rebox RE-9000
My Location
The Netherlands
Need to try and find the sweet spot where the skew positively impacts 28.2 but not to the detriment of the other sats.

Or use a sidecar LNB, with 7.5 degrees different skew, for the Astra satellites?
I've never seen that tested, though.

And I don't know which of these two LNBs to use for the Eutelsat satellites then, such as 13E. They have 3.535 degrees pre-skew....

Greetz,
A33
 

cwsat

Member
Joined
Sep 27, 2022
Messages
379
Reaction score
122
Points
43
My Satellite Setup
Gibertini 85cm / Dragonsat 3000 motor / Inverto Black Ultra LNB
My Location
Midlands

sonnetpete

Grumpy Old Retired Moderator and quiz inquisitor..
Joined
Dec 13, 2008
Messages
8,963
Reaction score
3,508
Points
113
Age
74
Website
wordpress.com
My Satellite Setup
Laminas 1.2M fibre dish with an IBU, on a Clarke Tech USALS motor, covering 57E - 24.5W to an Octagon SX88. Displayed on a 20" Dyon LED TV.

Seperate 80 cm dish on 28E with a Humax Freesat for SWMBO.
Free Sat V8 meter. Sony Bravia 46" LCD, Sony BluRay and Home Cinema.
My Location
Normandy, France
Bearing in mind the skew you have to 'adjust' for 28.2, have you checked that the dish is mounted in total alignment with the motor stub? If it's slightly slanted, that may account for some of the skew issues...
 

cwsat

Member
Joined
Sep 27, 2022
Messages
379
Reaction score
122
Points
43
My Satellite Setup
Gibertini 85cm / Dragonsat 3000 motor / Inverto Black Ultra LNB
My Location
Midlands
Then East (astra 3B at 23,5E). Many frequencies will provide clues on how your system is performing.

23.5e is strong.

I am going to hook the meter up to the minidish later and compare the strength and quality between the two dishes as currently, both dishes are performing the same

The dish is dead zero on the motor mount.
 
Top