ettoremarchetti
Member
- Joined
- Feb 12, 2012
- Messages
- 1
- Reaction score
- 0
- Points
- 0
- Age
- 66
- My Satellite Setup
- Mvision HD200
- My Location
- brussels
I stumbled on a workaround to the "cam initialising" bug.
Firstly, I sent my receiver back to the dealer; as a result the banner appears less often than before and this gives me some 30 minutes of watching before it appears.
Then, once the banner appears, pressing first the play button (which makes the list of recordings appear) and then the exit button removes the "cam initialising" banner. The banner returns. Within a two-hour movie, I had to repeat the two-button sequence some 6-7 times.
My MD200 drives a projector via a 1.5 m cord attached to a HDMI switch which in turn is connected to the projector via a 5M cord. I had to install the 472 OS.
I have the impression that the problem is with the software, not the hardware.
Firstly, I sent my receiver back to the dealer; as a result the banner appears less often than before and this gives me some 30 minutes of watching before it appears.
Then, once the banner appears, pressing first the play button (which makes the list of recordings appear) and then the exit button removes the "cam initialising" banner. The banner returns. Within a two-hour movie, I had to repeat the two-button sequence some 6-7 times.
My MD200 drives a projector via a 1.5 m cord attached to a HDMI switch which in turn is connected to the projector via a 5M cord. I had to install the 472 OS.
I have the impression that the problem is with the software, not the hardware.