Reply to thread

Message

<blockquote data-quote="godzillafan" data-source="post: 800108" data-attributes="member: 370215">Hi GuysThanks S for the extra help (AA etc), man they do my head in.&nbsp; Putting a TV aerial was much easier than this!HI H, yes the 16/1 and 20/1 is the main - after a few weeks of rain and poor weather its our first wee in the garden for a month and a half.&nbsp; After the lawn, fence repair, TV aerial I finally got to the sat.I dare not try the 16/1 until I figured out the advance system hence the mad updates and headaches.&nbsp; The 4/1 was atest to see if it works and i can get a feel or understand the advance section.After the scan I managed to get over 4800 channels on 13/19/26/28 to see if they work.&nbsp; Scanned a few through and so far they are fine.Next is to put up the 10/1 (x2), I am planning now to put 1 up and scan to see how well the system copes.Once thats done, I am going to work out putting a 10/1 into the 4/1 emp (slot 1) and see how to tune that via the vu+.&nbsp; I am guess that it will change all the setting or they will be different.Then repeat the process with 2x 10/1 into slot 1 and 2 of the emp 4/1 (hope that makes sense).I am going to take it a step at a time as this is harder than actually putting up the dish!</blockquote>

[QUOTE="godzillafan, post: 800108, member: 370215"] Hi Guys Thanks S for the extra help (AA etc), man they do my head in. Putting a TV aerial was much easier than this! HI H, yes the 16/1 and 20/1 is the main - after a few weeks of rain and poor weather its our first wee in the garden for a month and a half. After the lawn, fence repair, TV aerial I finally got to the sat. I dare not try the 16/1 until I figured out the advance system hence the mad updates and headaches. The 4/1 was atest to see if it works and i can get a feel or understand the advance section. After the scan I managed to get over 4800 channels on 13/19/26/28 to see if they work. Scanned a few through and so far they are fine. Next is to put up the 10/1 (x2), I am planning now to put 1 up and scan to see how well the system copes. Once thats done, I am going to work out putting a 10/1 into the 4/1 emp (slot 1) and see how to tune that via the vu+. I am guess that it will change all the setting or they will be different. Then repeat the process with 2x 10/1 into slot 1 and 2 of the emp 4/1 (hope that makes sense). I am going to take it a step at a time as this is harder than actually putting up the dish! [/QUOTE]

Verification