jagxf
Member
- Joined
- Aug 24, 2008
- Messages
- 16
- Reaction score
- 8
- Points
- 3
- Age
- 52
- Location
- birmingham
- My Satellite Setup
- motorised 2.4mtr channel master pick up nile sat
- My Location
- westmidlands birmingham
my setup 2.4mtr channel master
http://www.satbeams.com/footprints?norad=26470
my setup 2.4mtr channel master
I have just checked that freq on my tm5302, and 1.25 dish. S 82% Q 56%Only 12130 V 27500 on 7 west Martin everything else I receive is from 7.3 west Eutelsat 7WA Middle East North Africa beam as no signals from N201 or the North West African beam from 7.3 west.
I have just checked that freq on my tm5302, and 1.25 dish. S 82% Q 56%
my setup 2.4mtr channel master
should i use the channel master feedhorn instead which is betterNice dish. That feedhorn, I believe, is optimised for a restricted frequency band and the full one.
I think if you have original CM feedhorn you better use it. If it is original, that means it was designed by antenna manufacturer and should make better illumination of the dish. And make sure it is located in the focus of the dish. BTW, did you make exact measurements of this nice dish?should i use the channel master feedhorn instead which is better
what do you mean what should it be from lnb to centre of dish thank youI think if you have original CM feedhorn you better use it. If it is original, that means it was designed by antenna manufacturer and should make better illumination of the dish. And make sure it is located in the focus of the dish. BTW, did you make exact measurements of this nice dish?