NOW you can turn your receive super to ultra enter here

[rogeriko]

For DSN recievers go to digitalsatnetwork.net they have a forum in english to help you and all the correct updates and patches.

I just uploaded V319 to starsat 550 ultra from satdw and with the receiver tuned to HISPASAT ONLY it works fine no hangups or freezing D+ and Cabo. I think the problems start when you change to astra hotbird etc.

 

[rogeriko]

Correction. Today V319 from satdw on starsat 550 ultra freezes and causes green screen of death this software no good for hispasat. I will try sonysat tonight. Jacko do you get hispasat? I am in Eastern Greece not far from you and i get hispasat on 80 cm dish easy.

 

[jack0]

Jacko do you get hispasat? I am in Eastern Greece not far from you and i get hispasat on 80 cm dish easy.

my dish is 110 cm & hispa requires 180 cm at less on syria


30°WEST HISPASAT

in moraco tunis algera &lebia u need 120 cm dish
in syria jordan & lebanon u need 180 cm dish
in eygipt u need 240 cm dish
in north of saudi kingdom u need 300 cm dish
in west of saudi kingdom u need more than 360 cm dish
its difficult to recive it in south of saudi kingdom
u can't recive it at all in east of saudi kingdom kuait bahrain uae & oman


19.2°E Astra 1C/1E/1F/2C

in moraco tunis algera u need 120 cm dish
in lebia eygipt & around MES u need 180-240 cm dish
in arabic gulf not less than 400 cm dish

 

[rogeriko]

loaded id truman and then sonysat 9500 into starsat 550 ultra. The software works but it freezes worse than starsat soft, then i loaded bright 4200 but this dosnt decode any scrambled channels only fta. it seems that nothing will work for d+ on starsat machines. Going back to old super software cabo only. It was fun trying but we must wait for new soft or else the starsat machines are finished.

 

[jack0]

V319 OPENS D+at 03 02 2006
its avaliable for all ultra 550 650 3100 3200 3500 560
for only super 650 3200 3500 560

good luck

 

[jack0]

from private message

thank you for your help
pls i have some questions .

1- i have SR-X650 super
i want to decrypt the mtv chs mcm..on astra
so i tried to input the keys manualy ..did not work
is there any other way ..

inputing keys by remonte control change it virtualy only no real change
cause if u open sw file using hex editing tool "hex=16 sympole system"u will find the same key repeated four times the first tow is for showing on monitor
the last tow is the real key used to decrypt and u should change these but carefully
i'm learned and ready to explain it after 13 01 2006
its very important and dangerous to use this tools with out expert, any mistake will damage the sw file & ofcours the stb if loaded

where find this tool and how to use it correctly
i don't have time now to exaplin it here causu i will take examans from 03 to 13 Feb after it u can ask me to exaplain it

what about softcom ?

there is no tool untill now to load softcam file to stb family starsat 550 650 3100 3200 3500 560 super & ultra & similar stb.

i try to install the tools file from
_http://www.satdw.com/viewdownloads.asp?name=8-Tools&main=group2
but it is not helpful i think.

the tool here is PC EDITOR its only for CHannels
no other uses

2- i want to download the irdtools where can i
find it

its the same name of August_26,Tools at first page
its for sw & pictures load only
don't work realy for channels
here is it:
_http://www.tmsatsw.com/tm-100/August_26,Tools.zip

3-what is the sdx and sgn files
thanks:-Cbigsmil

sdx is file type which contain satellite transporders"TP" information such as frequency ,sympole rate, polarity ...etc.
sdx file is used to uppdate receiver to include new TP.
there is no tool untill now to input it to stb family starsat 550 650 3100 3200 3500 560 super & ultra & similar stb,instead u should input it manually by remonte control

sgn files is softwares files like bin files exactly so u can replace sgn by bin & upload it to corespond stb & work well
sgn file is for sw files of some other starsat family models don't use it for super and ultra stb it is have
thier own devieces.

 

[rogeriko]

just downloaded v319 for starsat 550 super but it still freezes on tv cabo nagra why does it do this?

 

[jack0]

just downloaded v319 for starsat 550 super but it still freezes on tv cabo nagra why does it do this?

cause they do these mistakes in version 316 and when develop v319 they only change key no real changes in softwre programming
no soulation now except uses old versions befour v316 such as 314 & change keys for boquets on your self
if changing keys by remonte control don't open the ch let me posted and i'll give u the right way to edit sw by Hex tool and let keys work
good luck

 

[garik]

Hi jack0
I can't download cleaner id truman from this url?????
_http://www.tmsatsw.com/tm-100/ID_TRUMAN_.zip

 

[rogeriko]

Jacko I have found the last good software is 310 for super and 311 for ultra from nov 21, this does not freeze or crash. After this all software has problems with nagra on hispasat. This software has no support for nagra2. Please PM me with details on Hex Editor etc to enter rsa keys etc for nagra2. I repair computers for my job I am sure i can do it.

 

[fawzi_tn]

Hi
I need help to turn my starsat 550 d plus to super or ultra
Can you help me
Thanks a lot

 

[jack0]

Hi
I need help to turn my starsat 550 d plus to super or ultra
Can you help me
Thanks a lot

yes i can easly help u
1. the flash size of plus is 1 mega where as super and ultra have 2 mega flash
2. the differece between plus and super is only the flash size where as there is many different between plus and ultra
3. so as i usualy do it easly i replace flash part of plus stb 1 mega with the flash of super 2 mega and then the stb become exactly super .

good luck

 

[jack0]

Hi jack0
I can't download cleaner id truman from this url?????
_http://www.tmsatsw.com/tm-100/ID_TRUMAN_.zip

here i upload it for u
http://www.sendspace.com/file/6wq11b

any other services

 

[garik]

2jack0
Tashakur!!!
Thank you.

 

[jack0]

Jacko I have found the last good software is 310 for super and 311 for ultra from nov 21, this does not freeze or crash. After this all software has problems with nagra on hispasat. This software has no support for nagra2. Please PM me with details on Hex Editor etc to enter rsa keys etc for nagra2. I repair computers for my job I am sure i can do it.

THE NEEDED PROGRAMES:
1.Hex Workshop 4.23 & crack it
the program:
http://www.download.com/Hex-Workshop/3000-2352_4-10264932.html?tag=lst-0-1
the crack:
http://www.crackdb.com/get_2790_Hex.workshop.4.23.feb.21.2004_crack.html


1.open starsat software v316 with hex workshop
2.click on search & choose hex value then wright the old key of RSA which isin hex the first 16 letter is:
key removed Admin
& THEN CLICK FIND

3.CLICK ON THE FIRST LETTER and begin to wright the new key in hex which is:
key removed admin
4. CLICK SAVE
5. U SHOULD FIND THE RSA KEY 4 TIMES & ITS VERY IMPORTANT TO CHANGE ALL
6. now change the second 16 letter of RSA in a same way

that is it
who to get hex valu of RSA KEY?
AS THE KEYS GIVEN IN SOFTCASM TYPE IT ALSO GIVEN IN HEX FILES
SEARCH FOT IT & U FIND IT

very important:
the keys above is olds and not working now but i have the picture for it so i eright it
u should search the apropriate hex keys old and new

here picture demonstrating the procedure:

here program for hex key file c alled multicameditor
multicam editor

Picture removed as contains keys Admin it does not matter if they are old or new they are KEYS. Read and abide by the rules or be banned

 

[rogeriko]

Thanks I will give it a go.

 

[jack0]

Thanks I will give it a go.

I don't know how to give the right hex key cause i bringr it from a forum not by a program
u should know the old hex key of your sw version and the latest one
i don't have hex keys for v310 or v311
the method is easy but be careful any mistake the file damaged
u should not add or delete any byte only replace
good luck

 

[jack0]

any services i'm ready as i can

 

[rogeriko]

Loaded V320 for 550 super it opens all channels on hispasat nagra1 nagra2 very well. But after 10 seconds the machine shuts down on any channel. this is a new problem!!! it says err and shuts down also did not restart after loading update.

 

[jack0]

Loaded V320 for 550 super it opens all channels on hispasat nagra1 nagra2 very well. But after 10 seconds the machine shuts down on any channel. this is a new problem!!! it says err and shuts down also did not restart after loading update.

I'm searching for a solution
i suggest that the file is protected so loaded in clean stb which mean load ID TRUMAN first
try it may be work
good luck
i'll not put it in the forum untill i find a solution