OCTAGON SF8008 E2 4K UHD

[dishdx]

I will test it at the weekend, I have to manage multiboot. So if i understand. I need download new built of Open ATV + I need to place blindscan plugin into usr/bin folder? This plugin will not be updated directly in image? Thank you for good news!

 

[Octagon-Germany]

atv, vix etc .. image new date example from this week, also from 12. Jan ok too. yes replace octagon-blindscan in usr/bin . udpate direct image in few days. welcome

 

[Lexzie]

The whole point of blindscan is it scans the unknown transponders. If you want the known transponders just do a normal manual scan.

Yes off course, I mean I have seen testing blind scan not finding anything or very little on sats where a lot transponders were active. So even the known transponders couldn't be found, so what unknown transponders weren't found? You'll never know. But I meant it as means of test. If a blindscan can't even find the already known signals what's the reliability in finding new/changed transponders?

Blindscan finds SR >= 1000
SR 874 works (don't believe much lower than that..)

That's way to high. To bad if blindscan can't scan below 1000, but I can understand that that's difficult and can live with that.
But in a manual scan a DM920 (which I believe has the same tunerchip?) could find as low as 285. (Astra 3B, 23.5°E, 12647 V, Antenne Düsseldorf).

And how is the representation of the signal strength now? I believe in earlier softwareversions there were issues with that?
It is necessary for fine-tuning a movable dish via vbox+actuator.

 

[Octagon-Germany]

Update Blindscan:
- diseqc 1.1 fix.
- c band circular & liniear fix.
- diseqc motor fix.
- switch correctly OK
- diseqc command fix.
- add. power down after scan done

oe-alliance/oe-alliance-core


Ab morgen in den Images!
From tomorrow in Images!

 

[dishdx]

Hi! I just tested blindscan with 8/1 switch on Open ATV 6.2 from 17.1.2019 and i have to say, that IT WORKS!! No blindscan problems on DiseqC 1.1 observed! Big Thank You!

 

[Octagon-Germany]

@dishdx

good to know, thanks for report

 

[Octagon-Germany]

OCTAGON SF8008 4K UHD Treiber (Driver) Update 18.01.2019

- Driver, Hilib, libreader Update:
- HDR/HLG detection (Infobar)
- Letterbox issue fix for HD Video


oe-alliance/oe-alliance-core


Ab morgen Images.
From tomorrow Images.
Yarinki Imajlardan itibaren.

 

[Octagon-Germany]

HDR HLG in Infobar with Driver Update 18-01-2019



See Photos:

 

[MCelliotG]

Could someone test my skin on SF8008 to see if they appear too?

 

[Octagon-Germany]

Which is your Skin ?

 

[scopus]

Could someone test my skin on SF8008 to see if they appear too?

Yes, switching nicely on your skin between HD and 4K

 

[MCelliotG]

Love it, thanks!!!

 

[Octagon-Germany]

T2-MI (T2MI) PLP Direkt Scan Support OCTAGON SF8008

ab Treiber (Driver from) 29.01.2019

Siehe Bilder (See Photos):

Getestete Satelliten (Tested Satellites):
- 4.9E ZeonBud
- 40E TP`s: 3665, 3685, 3915, 3767, 3779
- 40.5W: 4000

Treiber + E2 Images in den kommenden Tagen.
Driver + E2 Images in the coming days.

 

[MCelliotG]

FINALLY!!!!
What should have been there a long time ago is now a reality!!!! T2-MI decapsulation as an Enigma2 process with patches for t2mi_decap parameters!!!

 

[Octagon-Germany]

yes, and single and multi PLP, both supporting with direct scan

 

[MCelliotG]

Yes, essentially what astra-sm does as a separate streaming agent has now been intergrated into the Enigma2 system with stdout returning as a source in service scan. What I've been saying since T2-MI was firstly introduced to Enigma2. SF8008 users will be very happy as the first recipients!
And not only that, this implementation is a beginning to endless possibilities as well!

@scopus I can't wait for you and other users to try it on Zeonbud, and everything else T2-MI receivable (53E, 80E, 40E etc).

 

[Captain Jack]

Does this have potential to be ported to other E2 receivers?

 

[MCelliotG]

If it's done as I suspect it was done, yes! If not, no, at least not yet! Let's hope I'm right!

 

[Octagon-Germany]

Wer testen kann und will, einfach PM senden.
Who can test and wants, just send PM.
Test etmek isteyenler özel mesaj yollasin.

 

[scopus]

Do we need a total reflash? As I could not see the T2MI option after an online update, and blind scan also crashes on start up