Reply to thread

Message

<blockquote data-quote="Tony Daly" data-source="post: 1098543" data-attributes="member: 402465">Hello Everyone.Perhaps I didn't explain myself properly in my previous post ?When I used my 7102HD with the GBOX it stored the satellite positions in the GBOX as certain position numbers.I have a list of the GBOX positions as set up with the 7102HD written down on a sheet of paper.Now I would like to save those positions in the same order in my SX88+.In the picture below I am on Astra 19E which is position number 1 on the GBOX. If I press save in the SX88 menu it will save Astra 19E as position number 1 on the GBOX. I can do that one satellite after the other on the SX88+.My problem is that some of the satellite positions on the GBOX were not used. As an example positions 1 to 6 are used on the GBOX but 7 &amp; 8 were not used when I used the 7102HD.Now if I save positions 1 to 6 on the SX88+ what do I do when I come to positions number 7 &amp; 8 on the SX88+ ?How do I skip positions number 7 &amp; 8 on the SX88+ &amp; store the next satellite at position number 9. The SX88+ seems to want to store the satellites one number after the other with no option that I can see to skip a number.I need help here guys.Tony.[ATTACH=full]132962[/ATTACH]</blockquote>

[QUOTE="Tony Daly, post: 1098543, member: 402465"] Hello Everyone. Perhaps I didn't explain myself properly in my previous post ? When I used my 7102HD with the GBOX it stored the satellite positions in the GBOX as certain position numbers. I have a list of the GBOX positions as set up with the 7102HD written down on a sheet of paper. Now I would like to save those positions in the same order in my SX88+. In the picture below I am on Astra 19E which is position number 1 on the GBOX. If I press save in the SX88 menu it will save Astra 19E as position number 1 on the GBOX. I can do that one satellite after the other on the SX88+. My problem is that some of the satellite positions on the GBOX were not used. As an example positions 1 to 6 are used on the GBOX but 7 & 8 were not used when I used the 7102HD. Now if I save positions 1 to 6 on the SX88+ what do I do when I come to positions number 7 & 8 on the SX88+ ? How do I skip positions number 7 & 8 on the SX88+ & store the next satellite at position number 9. The SX88+ seems to want to store the satellites one number after the other with no option that I can see to skip a number. I need help here guys. Tony. [ATTACH type="full"]132962[/ATTACH] [/QUOTE]

Verification