Reply to thread

Message

<blockquote data-quote="Seaview" data-source="post: 1107687" data-attributes="member: 416482">Hello. Many thanks for the quick response.My set up is as follows:--Receiver is Edison OS Nino Pro S2X + T2/c, Using Openatv 6.4, tuner A currently configured. -1 metre dish with universal LNB.-USALS Positioner Motor with digital read out.-Longitude 6.903 West, Latitude 52.242 North. (South East Ireland)Positioner/dish direction and declination seems to be correct, I can manually scan most of the satellites on the Eastern path, ie. Astra 1, 2, Hotbird etc. basically any which have a decent signal.The settings for the tuner A are giving me some difficulties, ie. whether to use Simple or advanced, also which USALS setting is best.Selection of satellites within the tuner option seems to be straightforward, however satellite selection is requested again when using automatic scan. I am informed that the dish initial position should towards a satellite which is closest to my South.How do I tell the scanning setup which position I am using for initial scan? Do I just manually get the dishto the initial satellite, in my case Eutelsat 3B. How do I register that position?Can the auto scan differentiate between satellites which are very close together?Any pointers about any of the above would be gratefully received.Thanks</blockquote>

[QUOTE="Seaview, post: 1107687, member: 416482"] Hello. Many thanks for the quick response. My set up is as follows:- -Receiver is Edison OS Nino Pro S2X + T2/c, Using Openatv 6.4, tuner A currently configured. -1 metre dish with universal LNB. -USALS Positioner Motor with digital read out. -Longitude 6.903 West, Latitude 52.242 North. (South East Ireland) Positioner/dish direction and declination seems to be correct, I can manually scan most of the satellites on the Eastern path, ie. Astra 1, 2, Hotbird etc. basically any which have a decent signal. The settings for the tuner A are giving me some difficulties, ie. whether to use Simple or advanced, also which USALS setting is best. Selection of satellites within the tuner option seems to be straightforward, however satellite selection is requested again when using automatic scan. I am informed that the dish initial position should towards a satellite which is closest to my South. How do I tell the scanning setup which position I am using for initial scan? Do I just manually get the dish to the initial satellite, in my case Eutelsat 3B. How do I register that position? Can the auto scan differentiate between satellites which are very close together? Any pointers about any of the above would be gratefully received. Thanks [/QUOTE]

Verification