nelson_b
Contributor
- My Satellite Setup
- Strong 4375 driving a 2.4 m Channel Master dual focus offset + Invcom Quad C120 K/U l.n.b. + BSC 421 and Zinwell C band l.n.b.,s - DR HD F15 - TM5302 - Octagon SX88+Optima - GT Media V7 - HD receivers. + other dishes currently in use - Antique 3.0 m Prodelin P.F. - Channel Master 1.8 m offset - Channel Master. 1.2 m.
- My Location
- North West Yorkshire - near Lancashire & Cumbria borders.
Thanks Nelson.
I did a bit of fine tuning of the Az/El and polarity skew to squeeze the last drop of juice from the signals. It was after the fine adjustment that I got a lock on 4081 V (ATV Pakistan) which I had never managed before.
I noticed that the feed/scalar pair distances for the 9 different frequencies that I locked had only a small pattern. It looked like the scalar distance of 5mm to 15mm was the optimum but not a hard and fast rule. I think that with some of these extreme fringe satellites like 38.0 East each frequency might have its own optimum parameters? The solution is a larger dish or a more favourable location for the beam footprint.
If you centrally locate the C-Band feed arrangement on your 2.4m dish it will be interesting to see what results you get, particularly any variance in signal levels from feed/scalar pair adjustments. I found that Samaa TV and Madani are easiest frequencies to lock, they always seem to be present any time of day and can both tolerate a lock of tweaking before losing a lock.
Hi- M.B.
Attached is my result so far ... probably more to be had later when strength improves this evening .. i recall when i had the 3m dish on this sat there was quite a bit of feed/scalar pair adjustments needed for individual t.p,s and i,m sure it will be the same with this 2.4 offset . what seems more apparent so far is the Az/El ... i cant get 4082 v (ATV) and 3742 H (OTR) with the same Az position .. around 0.5 of a degree between them.












