smargo in dm800

C

cloneme

Member
Joined
Oct 22, 2009
Messages
17
Reaction score
0
Points
0
Age
81
My Satellite Setup
95cm offset dish with H-H motor, Dreambox500S, AP to Dreambox and PC
My Location
Australia
passete said:
Black home 0.12 is a very old image, and is not oe 1.6 !
Click to expand...

What would you recommend? I thought Nabilosat enigma 2 blackhole v0.12 was oe 1.6 the lastest dated 19/10/2009. I have used Pli jade 3 enigma 2 dated 25/9/2009 also.
 
P

passete

Member
Joined
Sep 26, 2010
Messages
9
Reaction score
0
Points
0
Age
56
My Satellite Setup
dm8000
My Location
fr
Try new enigma or gemini, in both images you can install the addons (emus etc), directly by blue panel.
 
C

cloneme

Member
Joined
Oct 22, 2009
Messages
17
Reaction score
0
Points
0
Age
81
My Satellite Setup
95cm offset dish with H-H motor, Dreambox500S, AP to Dreambox and PC
My Location
Australia
I decided to have another go at getting smargo working. I have installed sim201e_DreamElite BlackHole_13_OE1.6-DM800-20100419 on my DM800 clone. I am using CCcam2.1.4 and NDs card. The DreamElite image has all drivers for smargo. However I still can't get Dreamelite device manager to recognise it nor Cccam as it shows no or unknown card. My smargo is set to
Mode =Fixed
Frequency= 3.69
Kernel=Normal
T-Mode=T=0
EGT=0
When I run telnet dmesg|grep usb I get:
usbcore: registered new driver usbfs
usbcore: registered new driver hub
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
usb usb1: configuration #1 chosen from 1 choice
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB controller
usb usb2: configuration #1 chosen from 1 choice
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB controller
usb usb3: configuration #1 chosen from 1 choice
usb usb2-1: new full speed USB device using brcm-ohci-0 and address 2
usb usb2-1: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
drivers/usb/serial/usb-serial.c: USB Serial support registered for p12303
usbcore: registered new driver p12303
drivers/usb/serial/p12303.c: Prolific PL2303 USB to serial adapter driver
usb 2-1.2: new full speed USB device using brcm-ohci-0 and address 3
usb 2-1.2: configuration #1 chosen from 1 choice
drivers/usb/serial/ftdi_sio.c: Detected FT232BM
usb 2-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
So it looks like it recognises the smargo, and can put a flash stick into the port and it is recognised in Device manager but not the Smargo.
My Cccam cfg is:
SERIAL READER: /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3690000
BOXKEY: /dev/ttyUSB0 01 02 03 04
SMARTCARD SID ASSIGN: /dev/ttyUSB0
Any ideas please.
 
P

passete

Member
Joined
Sep 26, 2010
Messages
9
Reaction score
0
Points
0
Age
56
My Satellite Setup
dm8000
My Location
fr
Try kernel = dreambox and/or Mode auto or 6.00
SERIAL READER : /dev/ttyUSB0
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
 
C

cloneme

Member
Joined
Oct 22, 2009
Messages
17
Reaction score
0
Points
0
Age
81
My Satellite Setup
95cm offset dish with H-H motor, Dreambox500S, AP to Dreambox and PC
My Location
Australia
passete said:
Try kernel = dreambox and/or Mode auto or 6.00
SERIAL READER : /dev/ttyUSB0
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
Click to expand...

Thanks will give it a go on the weekend.
 
C

cloneme

Member
Joined
Oct 22, 2009
Messages
17
Reaction score
0
Points
0
Age
81
My Satellite Setup
95cm offset dish with H-H motor, Dreambox500S, AP to Dreambox and PC
My Location
Australia
Well I still can't get smargo to show in Device Manager. When I run CCcam I get this:
root@dm800:~# /var/bin/CCcam_214 -d
13:35:54.486 CCcam: ===========================================
13:35:54.489 CCam: starting CCcam 2.1.4 compiled on Jan 30 2010@16:28:03
13:35:54.489 CCcam: ===========================================
13:35:54.490 CCcam: online using node Id e24307853e2bf0f1
13:35:54.504 CCcam: dvb api3 detected
13:35:54.507 CCcam: BCM detected
13:35:54.507 CCcam: create 8 cam device(s)
13:35:54.507 CCcam: card detect failed
13:35:54.875 CCcam: readkeyfile: cannot open /var/keys/softcam.key or not found
13:35:54.877 CCcam: readkeyfile: cannot open /var/keys/AutoRoll.key or not found
13:35:54.877 CCcam: static cw not found or bad
13:35:54.878 CCcam: parsed 0 entries from /var/etc/CCcam.prio
13:35:54.879 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
13:35:54.880 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
13:35:54.882 CCcam: server started on port 12000
13:35:54.909 CCcam: no working cam devices, no need to start pmthandler
root@dm800:~#

I don't understand what it all means
 
C

cloneme

Member
Joined
Oct 22, 2009
Messages
17
Reaction score
0
Points
0
Age
81
My Satellite Setup
95cm offset dish with H-H motor, Dreambox500S, AP to Dreambox and PC
My Location
Australia
Using the yellow then red button i'm getting this:
In Entitlements it reads
Card reader /dev/ttyUSB0
handled 9(0) ecms and 0(0) emms
NDS Card xxxxxxx
Entitlement info

SHARES
dev/ttyUSB0 caid: 96c sys:NDS

SERVERS
192.168.1.103:12000 - 0 cards
What does it mean?
 
P

passete

Member
Joined
Sep 26, 2010
Messages
9
Reaction score
0
Points
0
Age
56
My Satellite Setup
dm8000
My Location
fr
Well, it seem's good news, your smargo and card are detected by CCcam !

Now, maybe something is missing, maybe Boxkey for nds ?
 
C

cloneme

Member
Joined
Oct 22, 2009
Messages
17
Reaction score
0
Points
0
Age
81
My Satellite Setup
95cm offset dish with H-H motor, Dreambox500S, AP to Dreambox and PC
My Location
Australia
passete said:
Well, it seem's good news, your smargo and card are detected by CCcam !

Now, maybe something is missing, maybe Boxkey for nds ?
Click to expand...

Thanks I thought it was connected, and my boxkey is in CCcam ok as when I run Newcs 1.67/CCcam 2.1.4 and put card in front slot with same box key it works ok with pictures.

But when I change Newcs to smargo settings it's detecting smargo and card but that's all.
My CCcam is:
SERVER LISTEN PORT: 12000
SERIAL READER: /dev/ttyUSB0 smartreader+
BOXKEY: /dev/ttyUSB0 xx xx xx xx
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3580000
N: 192.168.1.103 15000 xxxx xxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14
 
P

passete

Member
Joined
Sep 26, 2010
Messages
9
Reaction score
0
Points
0
Age
56
My Satellite Setup
dm8000
My Location
fr
Try like This :

SERIAL READER : /dev/ttyUSB0
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
BOXKEY: /dev/ttyUSB0 xx xx xx xx


I i think that you don't need Newcs, cccam will do it !
And remove your Nline, test again !
 
C

cloneme

Member
Joined
Oct 22, 2009
Messages
17
Reaction score
0
Points
0
Age
81
My Satellite Setup
95cm offset dish with H-H motor, Dreambox500S, AP to Dreambox and PC
My Location
Australia
passete said:
Try like This :

SERIAL READER : /dev/ttyUSB0
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
BOXKEY: /dev/ttyUSB0 xx xx xx xx


I i think that you don't need Newcs, cccam will do it !
And remove your Nline, test again !
Click to expand...

Thanks passete, I'm in OZ using a foxtel orange nds card which is different to uk and dosn't seem to work in dm800 with CCcam only. It dose work in dm500 with Cccam only though.
 
C

cloneme

Member
Joined
Oct 22, 2009
Messages
17
Reaction score
0
Points
0
Age
81
My Satellite Setup
95cm offset dish with H-H motor, Dreambox500S, AP to Dreambox and PC
My Location
Australia
I dumped Newcs and changed CCcam 2.1.4 to :
SERIAL READER : /dev/ttyUSB0
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
BOXKEY: /dev/ttyUSB0 xx xx xx xx

I changed smargo mode to dreambox but it's not recognised in entitlements so I changed back to normal and it's recognised.
Also in CCcam Info (yellow button/red button/ I still get
In Entitlements it reads
Card reader /dev/ttyUSB0
handled 9(0) ecms and 0(0) emms
NDS Card xxxxxxx
Entitlement info

SHARES
dev/ttyUSB0 caid: 96c sys:NDS

SERVERS
192.168.1.103:12000 - 0 cards
 
C

cloneme

Member
Joined
Oct 22, 2009
Messages
17
Reaction score
0
Points
0
Age
81
My Satellite Setup
95cm offset dish with H-H motor, Dreambox500S, AP to Dreambox and PC
My Location
Australia
Just to add my nds card is caid 096c and i don't think CCcam 2.1.4 can decrypy it.
 
O

ormoslo

Member
Joined
Jan 1, 2000
Messages
13
Reaction score
0
Points
0
Age
53
Hello and Happy new year!
I have a clone dm800 and today I install iCVS image with Gemini3 wizard but I can't install smargo card reader.
Is smargo compatible with this new image ?
 
C

cloneme

Member
Joined
Oct 22, 2009
Messages
17
Reaction score
0
Points
0
Age
81
My Satellite Setup
95cm offset dish with H-H motor, Dreambox500S, AP to Dreambox and PC
My Location
Australia
Well I sorted out my problems, I had originally updated to V1.4 could never get it to work so ended up getting another smargo v1.3 and worked straight away. Atm I can't get it to work with just CCcam 2.1.4 only and have to use Newcs 1.67 and Cccam 2.1.2 to fire up. I'm using Nabilo BH image.
 
N

niteman1969

Member
Joined
Feb 25, 2008
Messages
1
Reaction score
0
Points
0
Age
54
My Satellite Setup
Dreambox 500S
Pentium Core 2 Duo E6600
1GB RAM
4x500GB Sata 2 HDD
ATI 2850 HD
My Location
London UK
Having had the exact same problems I can tell you are tearing your hair out
like i was anyway the simple facts...

If using OE1.5 image the smargo has to be in DREAMBOX mode
and has to be set in the smargo windows utility running in ADMINISTRATOR mode
in anything higher than XP or the changes will not be written to the smargo.

The config lines are like this

SERIAL READER: /dev/tts/0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/tts/0 6000000
BOXKEY: /dev/tts/0 xx xx xx xx

If however you are using OE1.6 image then smargo has to be in NORMAL mode
make sure you run the smargo windows utility in ADMINISTRATOR mode in any
windows os higher than XP, otherwise it will not write changes to the smargo.

The config lines for OE1.6 are like this

SERIAL READER: /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
BOXKEY: /dev/ttyUSB0 xx xx xx xx
 
O

ormoslo

Member
Joined
Jan 1, 2000
Messages
13
Reaction score
0
Points
0
Age
53
niteman1969 said:
If however you are using OE1.6 image then smargo has to be in NORMAL mode
make sure you run the smargo windows utility in ADMINISTRATOR mode in any
windows os higher than XP, otherwise it will not write changes to the smargo.

The config lines for OE1.6 are like this

SERIAL READER: /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
BOXKEY: /dev/ttyUSB0 xx xx xx xx
Click to expand...

Thanks!
With smargo at normal mode now is working
 
Top