Underworld 149

[Mickha]

Underworld 149 has been released:
What's New??
_____________________________________________
Emulators fixed:
s_x View-FreeX

 

[eddik]

JUst updated my diablo light to 2.3 succesfully and then loaded the new underworld 149 with my cas 3 no prob. However i have a technisat mf4-s reciever which iu bought in germany and when i insert the cam it shows "initializing the ci module" and thats it. The reciever wont accept the cam, in menu it shows no module. Didnt have a prob with trex 4.6, any help would be appreciated

 

[Mickha]

Check the Cam in your Cas 3.
Insert your Diablo Cam in to your Cas 3, start up the Cas Studio software, but not the Diablo Cam software, click on the Utilities tab and Common Interface Host.
You can check your cam in this and adjust the configuration settings.
If your Cam is recognized in the Cas 3 but still not in your receiver then check if there are any software upgrades available for your receiver.

 

[eddik]

thanks for your reply, ill try what you advise and post a reply

 

[peterscott66]

Hi again Mickha, i have downloaded and installed underworld 149 and lost Digitalb and loads of other channels. error message says "no smart card matching this channel" any ideas?

Peter

 

[Mickha]

You need to load the latest data bin file from 11/12, this contains the latest keys for DigitAlb and Kabel Kiosk, you should still be able to open Digi TV and Canal Digital.
You update the data bin the same way as you update the keys bin.
Download the new data bin file, uncompress it and place it on your computer desktop.
Insert your Diablo Cam in your Cas programmer and start up the Diablo Cam software, the same as loading the underworld file.
Click on the Cam File System tab, and connect.
In the right hand pane you should now see the files currently on the Diablo Cam.
Locate the new data.bin file in the bottom left hand pane, highlight it and click the green arrow pointing right.
Click yes to overwrite the old one, it only takes a few seconds, and then disconnect.

 

[PJ02]

Kabelkiosk is changing keys every day now, which makes watching NASN Europe a little tricky.

Hope they bring out an AU solution soon™

 

[BRIDGET69]

Where is the underworld file cannot find it

please help

 

[BRIDGET69]

Hi

i have updated my diablo cam with new 149 firmware, however it won't open channels - how do i download the latest key bin file cos that it what i think i have to do

let me know

cheers

 

[Mickha]

Underworld 149 already contains a keys.bin file which opens most channels.
Have you altered the configuration settings?
Go into the cams menu, enter the configuration folder, and ensure that both Emulators and N2 AU are turned ON.
Which channels are you trying to open?

 

[BRIDGET69]

I meed to update key bin file and data bin file i think

but where can i get it from

i went on sen spae to try and upload but dunno how to

please help


thanks in advance