castman
Member
- Joined
- May 4, 2007
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Age
- 69
- My Satellite Setup
-
Vantage HD7100TS
1m Als*t dish & Technomate TS2300 motor
Sky+HD
Diablo 2.3 lite
+ usual loaders / cards / CAMs
- My Location
- U.K.
I just got one of these and wondered what I can do with the ethernet connection? The manual only gives the example of connecting two 7100's together, are there other things you can do.....cardshare perhaps?
Also, have a problem with channels since updating to software 2.49T using USALS, firstly after doing a full auto scan the 7100 would not go to, or pick up a signal from Turksat (it had 20mins earlier with previous software) or Atlantic bird 3. I had to set it manually but it still wouldn't get a signal to the channels.
I did a factory reset and tried again, same result except I had problems with Intelsat at 1w in that in only downloaded about 12 channels for that bird.
It' s very strange
Also, have a problem with channels since updating to software 2.49T using USALS, firstly after doing a full auto scan the 7100 would not go to, or pick up a signal from Turksat (it had 20mins earlier with previous software) or Atlantic bird 3. I had to set it manually but it still wouldn't get a signal to the channels.
I did a factory reset and tried again, same result except I had problems with Intelsat at 1w in that in only downloaded about 12 channels for that bird.
It' s very strange