I opened a new thread because the original problem with the tuner was fixed and the box worked fine. It was only when I did a rescan that the unit locked up and is now not passing through the full boot sequence.
The other day decided to do a rescan to see if any new transmissions are available.
When i rebooted the box it started up OK but after about two minutes the boot sequence freezes and I get a cloloured flash for a few seconds on the top quarter of the screen.
This flash change in colour and...
Opened the box and found a loose IC floating around. Looked on the underside of tuner and found the position the IC was suposed to be in. Rsoldered it gently into place and it started working again.
But now new problem so see new posting on DM800 not booting.
My DM800 decided to give me a new message "No tuner found" this was after the unit stopped working
When I did a reboot it notified me that there is no tuner connected when i go into the setup.
Any Ideas
Hi All
Connected up my 7025 according to instructions and almost everything works.
The only problem is the fibre optica audio output.
The light is on. The regular audio outputs work. The Scart audio works.
Looking at the end connected to the receiver the light is on but no sound
Any Ideas
Eddie
Hi All
My Diseq seems to be working very slowly as when I switch channels it seems to take as much as a minute to switch over to a different LNB.
Also can anyone help me with the configuration of more than 4 LNB's as I have a diseq for 8 but cannot find how to configure it
Thanks and a happy...
Hi Thanks for the info but i have either done something wrong or did not fully ubdersatnd the process.
When i connect a different computer to my home network and enter the Dyndns adress it goes all the way and requests my user name and id,
Then the "Dreambox" screen opens and if I select the...
Hi
I want to be able to stream from my 7020 to the net as i will be away from home for a week and do not want to miss the rugby.
Are there any new ideas or ways of doing this?
Eddie;)O-st
Hi Guys
I have an 7020 which has been operating OK for about 6 months. I had installed an 80G disk into the unit but am interested in mapping a drive on a computer connected to the network.
On my previous 5620 i could map the drive but i understand that once a disk is installed internally the...
I have a 5620 which is either in deep sleep or has passed on.U-zzz
I connected to it with dreamup and was able to connect and download from the box to the PC. I was alos able to flash with the rel106.img but when i restart i get a blank screen on the TV and the "BOOT 5620" on the dreambox...
Found the problem
Box and remote not original. In the copy they did not use the IC that has the TV remote as it is much more expensive. Otherwise all the same
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.