Recent content by lew247

I have an Amiko XFinder 3 satellite meter I tried updating the software yesterday but I ended up bricking it as you can see from the picture Does anyone have the program for flashing it via the RS232 port or USB once it's bricked I have a USB RS232 cable but no idea how to flash the firmware...

I got it completely wrong sorry I have a Sky+ box that will use 2 feeds. I can use the splitter box to seperate it to feed the tv, but the TV also has a satellite input I'd like to use this for freesat as well Will I need a 2nd module or can I plug the cable straight into the tv Also in one room...

Sorry updated it now I forgot the actuall name and said "distibution amplifier" its a satellite multiswitch so I can feed my Quattro lnb and the tv/fm/dab antenna into it and have them all coming out on individual cables

I'm redoing my satellite setup and bought a quattro lnb and 80cm dish and an MS508 Satellite Multiswitch so I can feed all the rooms/tv's/recievers properly and have the tv antenna coming in on the same cable as satellite to the rooms. If I have 3 leads coming into one room, I can feed 2 of them...

Thanks

From Dishpointer Satellite location 0° Elevation: 28.9° Azimuth (true): 177.4° Azimuth (magn.): 179.4° LNB Skew [?]: -1.6° Turn counter-clockwise standing behind the dish Magnetic Variation 1.81° W on 1st June 2015 Instructions on the motor instructions My Latitude Elevation Angle...

I'm going to install a Alsat Superior Dark Motor and a Triax TDA88 dish on my Duo2 box I've installed motorised dishes before but way way way back in the early analogue days. What I'd like to know is the following. 1) IF I set the motor to 0° on the ground and then get the satellite reciever to...

Any chance I can have PM's enabled? I need a dish re-aligning in Manchester