How To Setup A Linux PC Card Server

[father ted]

still have the freeze issue with this ,every 5 mins any ideas???

 

[billyboydtr]

hi guys i have got this working now the reason i could not get it was the xml file i was editing was in the wrong place, school boy error, i have the card reading now but im using 961 card just testing , so thank's guy for all you help and i can see the card in cccam 2.12 now so happy day

 

[tomthebomb1968]

still have the freeze issue with this ,every 5 mins any ideas???

Are you connected to any other lines with CCcam?

 

[father ted]

Are you connected to any other lines with CCcam?

no m8 im tryng to get my own box to work right b4 i do anything

 

[B16MCC]

fatherted, the only thing I can see in your config is the clock speed is set way too fast at 538mhz. Set this to 358 and see how you go. I'm not sure this will solve your problem as the Omnikey reader is ISO compliant. This means the clock speed of the reader is set when the ATR is read from the card, so its likely the speed you enter is totally ignored. Just try it see what you get, there's no other issue I can see i n your config.

 

[father ted]

fatherted, the only thing I can see in your config is the clock speed is set way too fast at 538mhz. Set this to 358 and see how you go. I'm not sure this will solve your problem as the Omnikey reader is ISO compliant. This means the clock speed of the reader is set when the ATR is read from the card, so its likely the speed you enter is totally ignored. Just try it see what you get, there's no other issue I can see i n your config.

ok good news ive got it working just fine now,found in the cfg file something that shouldnt have been there,took it out and its now working thanks for all the help guys ,watched it all last nite no freeze,no clitches ,no pixilation ,watched the daughters for over an hour tonight and it was fine too in fact it had been on all day and np

 

[tomthebomb1968]

yes mate, I have. I'll add another tute soon. Now I've got the CCCCC 0.5.3 out I'll write the CCcam tutorial this week.

Well after some head scratching and hair pulling(I aint got much left anyway) I have managed to get CCcam running in conjunction with NewCs on the Ubuntu Server. It probably needs a bit of tweaking but for now i am a happy bunny. Look at those ecm times MEGA.

Big thanks to B16MCC for all your work on this adventure. :-worship

 

[pongo1]

Hi, i would love some help regarding this problem.
I have installed various things using apt-get and also the card drivers.

pcsc_scan results in detection of sly card issue 2009.. so working in that department.

omnikey is coming up as 002 in lsusb. I have tried nodes as 0,1,2 and pcci.

All result in the following and failure to start newcs.

This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 12:12:45
Reading Config file from /etc/newcs.xml
[ 22:50:08 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 22:50:08 ] [ Config ] Option <blockc0> for device 0 (Omnikey) not present, defaulting to NO
[ 22:50:08 ] [ Config ] Option <crypto-special> for device 0 (Omnikey) not present, defaulting to NO
[ 22:50:08 ] [ Config ] Option <PTShandshake> for device 0 (Omnikey) not present, defaulting to NO
[ 22:50:08 ] [ Config ] Option <Seca-PPV> for device 0 (Omnikey) not present, defaulting to NO
[ 22:50:08 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ NewCS ] Process ID is: 3856
[ 22:50:08 ] [ NewCS ] Ready to GO!



any ideas?

many thx

 

[corthebor]

Hello

I followed this thread and it almost works great.
When I change channels, the newcs comes with the following message:

[ Newcamd:12010 ] Command 80 from CCcam len 100
[ Newcamd:12010 ] ECM <- CCcam
[ SID ] Checking for SID 138D for Reader 0 (Omnikey) - SO is: 0
[ Newcamd:12010 ] Rejected SID 138D on Reader 0 (Omnikey) from CCcam


And keeps repeating this.

I have to kill newcs.i686.pcsc and start it up again. Then it works untill I change channels again.

Any idea what could be wrong?

I use newcs 1.67
cccam 2.0.11
Omnikey 3121
Ubuntu 6.06

thnx
Cor

 

[corthebor]

I installed everything on my SME Server under VMWare and now it works 100%.
I'm happy.

Cor

 

[Oakey22]

I am havin a little trouble with this, I have my ubuntu server setup and NewCS is working and is able to see my card when i goto the web interface but i type this into my CCcam.cfg file on my dreambox. N: 192.168.0.9 12010 newcs newcs 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 4

It is not connecting to my NewCS Server.

Any idea's why?

 

[Oakey22]

My problem was i had the wrong username and pass in the newcs.xml file sorted it now.

Do i need CCcam on the server if i wanted to cardshare?

 

[tomthebomb1968]

You will if you want to share anything other than your local card. Also anyone you give an N line to will have 7 rehare rights by default and there is no way to restrict this as far as i know. I have been testing with both N and C lines running and clients are reporting almost identical times with both despite the extra hop in CCcam, with which you have more control.

 

[Oakey22]

to run cccam aswell will i just have the N line in my cccam.cfg of 127.0.0.1?

 

[tomthebomb1968]

You are already running CCcam. NewCs is just reading your card. CCcam is connecting with this line N: 192.168.0.9 12010 newcs newcs 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 4

What you have to do to share with CCcam is look at the CCcam.cfg file. Look for the line

#Server Listen Port 12000
This is the default on any cfg but you choose whatever port you want.Port Forward it in your router the same way you did with 12010 for the NewCs setup and associate it with the same ip address, in your case 192.168.0.9. Then you just add the flines and clines as normal.


This description is to run both from the Pc server so you will need CCCam installed on it. If you mean can you share on from your receiver, Yes you can but this really defeats the purpose of setting up the Pc as a server .


Hope that makes sense

 

[Oakey22]

i was refering to running the cccam on my server not my dreambox, so i can card share from that and then transfer it to my box in the house on the LAN?

I do not currently have CCCam installed on my server so will need to do that.

Never done anything with linux so this is all new to me but getting there slowly.

 

[tomthebomb1968]

Hi again. I set up the pc server and let it run for about 4 or 5 days with a few Nlines to friends and family b4 I transferred my peers to the server from my dreambox.

I am no having strange problems, I think its to do with the Omnikey reader. Seems to wotk perfect and then for no apparrent reason the channels stop clearing. The OSD still shows NDS as green so its decoding ok and the ecm times for all the channels are below 0.2. If I log into Newcs management I can watch as the bad ecms log up.I have tried resetting the reader and this worked only once, restoring the picture. To get it back I have to killall newcs_167 and then resart it and away it goes again running fine till the next time. It is happening almost every day once a day.

I am actually running 2 omnikeys 1 with a new 963 and one with an old 961(might aswell use it till it runs out)
The 963 runs perfect the problem is the 961. I have just duplicated the settings for the first reader with the 963 settings for the 961 and have tried with and without boxkey and with and without updates. Doesn't seem to matter, still locks out at least once every day

Any ideas welcome

 

[yesfan]

Managed to get a server working great after struggling with clarkconnect and debian.

Channels all clear using N line in my DM but would like to use C lines to control re share etc. When I use F and C lines DM can connect to server but card is showing as 0, put N line back and all works again?

Would appreciate some advice around correct F and C lines? Just testing so my F line has only a user and pass, is this an issue? Is the C line port the same as the newcamd one in the N line or 12000 as default in cccam.cfg? When connecting cccam to newcs on the server I have used an ip of 127.0.0.1 is this correct or should it be server ip?

 

[B16MCC]

yesfan:- On an F line you must put the full settings for card access, emm and key file access and also for reshare option. For example

F: User1 Pass1 2 0 0 { 0:0:2 }

The C line port IS NOT the same as the newcamd_port.
The C line port is the one you have set using SERVER LISTEN PORT: in your CCcam.cfg
If you don't specify this then it is 12000 by default.
If NewCS server and CCcam are on the same machine then you can use 127.0.0.1 if they are different machines then the N line must point to the server IP.

 

[yesfan]

Thanks for the reply, its a bit clearer now but I'm still must be missing something obvious?

If I use your example, F: User1 Pass1 2 0 0 { 0:0:2 }, place this in cccam.cfg on server and enable listen port 12000, the put C line on DM:

C: 192.168.X.X 12000 User1 Pass1

I should be able to see 192.168.X.X:12000, cards 1 in cccam on the DM?

Problem is its not showing as connected and showing 0 cards, but using N line it works perfectly?