Top Tip T2-MI reception on E2 STB with SDG image - A complete step by step guide

Captain Jack · Apr 10, 2020

I am sure I saw a CAID on older Roscrypt channels (non T2 MI)...

The issue with that is that receivers would not know that the channel is encrypted and would not try to send the stream to the CAM. Though that's probably not the biggest problem. The biggest one is that Roscrypt CAM does not like most consumer receivers. Openbox one is the only one I know of that recognises it. Anyway, going off topic... Carry on.

MCelliotG · Apr 10, 2020

Yes, RosCrypt had a caid A101. Ghostcrypt does not! Most probably they feed the DVB-T2 transmitters with a special cardless receiver that decrypts the stream before terrestrial broadcast. I think they abandoned Roscrypt as it is now fully compromised.

Sutarman · Apr 10, 2020

Where is the problem, when trying to stream analysis it always fails.
Message :
[core/socket 4] getaddrinfo () failed
Name or service not known

Sutarman · Apr 10, 2020

duck77
Sorry, just clarification.
Why the Data ServiceRef that I can differ from the data you have.
For frequencies 3704 and 4018, on the Yamal 601 satellite.

duck77 · Apr 10, 2020

Sutarman said:
duck77
Sorry, just clarification.
Why the Data ServiceRef that I can differ from the data you have.
For frequencies 3704 and 4018, on the Yamal 601 satellite.

Maybe because i put flag on P (Use PIDs).
The way I have it works on my vu +.

EnoSat · Apr 10, 2020

MCelliotG said:
Yes, RosCrypt had a caid A101. Ghostcrypt does not! Most probably they feed the DVB-T2 transmitters with a special cardless receiver that decrypts the stream before terrestrial broadcast. I think they abandoned Roscrypt as it is now fully compromised.

some EMM data on main stream

MCelliotG · Apr 11, 2020

Can you explain what does the above mean? I don't see a specific reference to Perviy channel, just the whole stream.

EnoSat · Apr 11, 2020

know-how about update Gostcrypt CAM ?

Captain Jack · Apr 13, 2020

This is mine.

Sutarman · Apr 14, 2020

Thanks for all
Succeeded in SF4008

Sutarman · Apr 14, 2020

Dinobot 4K

dreambox1959 · Apr 20, 2020

Captain Jack said:
This is mine.

View attachment 129721

hi captain !
what is gostcrypt : a real ciphering or we just have to configure pid or something like that in data ?

Captain Jack · Apr 20, 2020

It doesn't/won't work in Enigma2 - it doesn't even initialise in it.

I just put the CAM in Openbox and it gives me colours.

EnoSat · Apr 20, 2020

send CAM with Stream to Octagon support ;)

Captain Jack · Apr 20, 2020

Err...?

4Himdj · Apr 24, 2020

hello I hope you can help me because support of my new e2 receiver seems disappear (From the beginning)
i have ax hd 61
please let me know what do I write in lamedb to watch 54,9 east. yes I know I should read first post but I did not understand. I've copied what mgcelliot post about bouquet and astra.conf but I don't know what to write in lamedb
this is a very important test for me because I suspect this receiver have some kind of problem (don't know what and nobody seems able to help me) with astra-sm, in fact also on hispasat I've problem and I can see nothing.
I suspect this because when I select a channel viewable through stream relay, the tuner is not occupied and i can normally switch to other satellite channels.

thank you very much

ps no problem on octagon sx88+ as you can see here

best regards

Analoguesat · Apr 24, 2020

4Himdj said:
hello I hope you can help me because support of my new e2 receiver seems disappear (From the beginning)
i have ax hd 61
please let me know what do I write in lamedb to watch 54,9 east. yes I know I should read first post but I did not understand. I've copied what mgcelliot post about bouquet and astra.conf but I don't know what to write in lamedb

The general rules of the forum are that you have to make the effort yourself. You cant expect someone else to do the work for you Go through all the posts from the beginning again. With a bit of luck you will understand and get it working.

If you arent willing to put the effort in then you have to do without.

nirvana · Apr 25, 2020

MCelliotG said:

I just made a new config for 54.9E, working great!
View attachment 129355
View attachment 129356

Here's my new config in astra.conf

Code:

-- RTRS 54.9E

f12674rtrs0 = make_t2mi_decap({
        name = "12674V T2-MI  PLP0",
        input = "http://127.0.0.1:8001/1:0:1:320:3A2:0:225B182:0:0:0:", -- required
        plp = 0,
        pnr = 0,
        pid = 4096,
})

f12674rtrs1 = make_t2mi_decap({
        name = "12674V T2-MI  PLP1",
        input = "http://127.0.0.1:8001/1:0:1:320:3A2:0:225B182:0:0:0:", -- required
        plp = 1,
        pnr = 0,
        pid = 4096,
})

f12694rtrs0 = make_t2mi_decap({
        name = "12694V T2-MI  PLP0",
        input = "http://127.0.0.1:8001/1:0:1:320:3A2:0:225B196:0:0:0:", -- required
        plp = 0,
        pnr = 0,
        pid = 4096,
})

f12694rtrs1 = make_t2mi_decap({
        name = "12694V T2-MI  PLP1",
        input = "http://127.0.0.1:8001/1:0:1:320:3A2:0:225B196:0:0:0:", -- required
        plp = 1,
        pnr = 0,
        pid = 4096,
})

make_channel({                                                        
        name = "12674rtrs0 ", input = { "t2mi://f12674rtrs0", },          
        output = { "http://0.0.0.0:9999/rtrs/12674plp0", },            
})                                                                    

make_channel({                                                        
        name = "12674rtrs1 ", input = { "t2mi://f12674rtrs1", },          
        output = { "http://0.0.0.0:9999/rtrs/12674plp1", },            
})                                                                    

make_channel({                                                        
        name = "12694rtrs0 ", input = { "t2mi://f12694rtrs0", },          
        output = { "http://0.0.0.0:9999/rtrs/12694plp0", },            
})                                                                    

make_channel({                                                        
        name = "12694rtrs1 ", input = { "t2mi://f12694rtrs1", },          
        output = { "http://0.0.0.0:9999/rtrs/12694plp1", },            
})

and the bouquet content

Code:

#NAME RTRS T2-MI (54.9E)
#SERVICE 1:64:16:0:0:0:0:0:0:0::---------- RTRS T2-MI (55E) ----------
#DESCRIPTION ---------- RTRN T2-MI (55E) ----------
#SERVICE 1:0:1:3F2:3182:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12674plp0:01 ПЕРВЫЙ КАНАЛ
#DESCRIPTION 01 ПЕРВЫЙ КАНАЛ
#SERVICE 1:0:1:3FC:3182:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12674plp1:02 РОССИЯ-1
#DESCRIPTION 02 РОССИЯ-1
#SERVICE 1:0:1:406:3182:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12674plp0:03 МАТЧ!
#DESCRIPTION 03 МАТЧ!
#SERVICE 1:0:1:410:3182:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12674plp0:04 НТВ
#DESCRIPTION 04 НТВ
#SERVICE 1:0:1:41A:3182:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12674plp0:05 ПЯТЫЙ КАНАЛ
#DESCRIPTION 05 ПЯТЫЙ КАНАЛ
#SERVICE 1:0:1:424:3182:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12674plp0:06 РОССИЯ-К
#DESCRIPTION 06 РОССИЯ-К
#SERVICE 1:0:1:42E:3182:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12674plp1:07 РОССИЯ-24
#DESCRIPTION 07 РОССИЯ-24
#SERVICE 1:0:1:438:3182:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12674plp0:08 КАРУСЕЛЬ
#DESCRIPTION 08 КАРУСЕЛЬ
#SERVICE 1:0:1:442:3182:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12674plp1:09 ОТР
#DESCRIPTION 09 ОТР
#SERVICE 1:0:1:44C:3182:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12674plp0:10 ТВ Центр
#DESCRIPTION 10 ТВ Центр
#SERVICE 1:0:1:7DA:3196:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12694plp0:11 РЕН ТВ
#DESCRIPTION 11 РЕН ТВ
#SERVICE 1:0:1:7E4:3196:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12694plp0:12 Спас
#DESCRIPTION 12 Спас
#SERVICE 1:0:1:7EE:3196:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12694plp0:13 СТС
#DESCRIPTION 13 СТС
#SERVICE 1:0:1:7F8:3196:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12694plp0:14 Домашний
#DESCRIPTION 14 Домашний
#SERVICE 1:0:1:802:3196:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12694plp0:15 ТВ3
#DESCRIPTION 15 ТВ3
#SERVICE 1:0:1:80C:3196:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12694plp0:16 Пятница
#DESCRIPTION 16 Пятница
#SERVICE 1:0:1:816:3196:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12694plp0:17 Звезда
#DESCRIPTION 17 Звезда
#SERVICE 1:0:1:820:3196:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12694plp0:18 МИР
#DESCRIPTION 18 МИР
#SERVICE 1:0:1:82A:3196:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12694plp0:19 ТНТ
#DESCRIPTION 19 ТНТ
#SERVICE 1:0:1:834:3196:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12694plp0:20 МУЗ ТВ
#DESCRIPTION 20 МУЗ ТВ
#SERVICE 1:0:2:456:3182:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12674plp0:ВЕСТИ ФМ
#DESCRIPTION ВЕСТИ ФМ
#SERVICE 1:0:2:460:3182:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12674plp0:МАЯК
#DESCRIPTION МАЯК
#SERVICE 1:0:2:46A:3182:225:0:0:0:0:http%3a//0.0.0.0%3a9999/rtrs/12674plp1:Радио России
#DESCRIPTION Радио России

hello, sorry but then you can't also post how the lamedb file should be configured?

Analoguesat · Apr 25, 2020

All the info you need has been posted on the forum. YOU have to put the work in to get things working. You will get general guidance only.

nirvana · Apr 25, 2020

I have not found any information on the topic as it is necessary to edit the lamedb

Top Tip T2-MI reception on E2 STB with SDG image - A complete step by step guide

Retired human

Specialist Contributor

Member

Attachments

Member

Attachments

Member

Specialist Contributor

Specialist Contributor

Specialist Contributor

Retired human

Member

Attachments

Member

Specialist Contributor

Retired human

Specialist Contributor

Retired human

Regular Member

Administrator

Member

Administrator

Member