Advice Needed missing frequencies 30W

[Maneto]

Thank you. Interesting. I have similar set-up: TRIAX 110 30W; elliptical 90x60 with 28E, 23E, 19E, 13E, 10/9E.
I am in footprint of 10/9E, but I cannot get ALL stations. THAT is the discussion.

I think the loss of channel reception from the 10 ° E and 9 ° E positions is due to the fact that it was a compromise - two satellites from one LNB. It helps to set the LNB to exactly one satellite. And don't forget that in the past all channels broadcast in the DVB-S standard and QPSK modulation ... The combination of the DVB-S2 standard, 8PSK modulation requires a higher signal reserve. Personally, I would choose the position 9 ° E where is 6ter HD. 10 ° E where the Kurdistan TV HD and Kurdistan 24 HD channels are QPSK modulated, but the DVB-S2 standard and the combination with high FEC 4/5 and 8/9 require an even higher signal reserve on the end viewer's side. I would also play with fine-tuning the SKEW LNB and sliding the LNB forward, backward. For the 10 ° E position, I would use a second dish.

 

[brother9]

I think the loss of channel reception from the 10 ° E and 9 ° E positions is due to the fact that it was a compromise - two satellites from one LNB. It helps to set the LNB to exactly one satellite. And don't forget that in the past all channels broadcast in the DVB-S standard and QPSK modulation ... The combination of the DVB-S2 standard, 8PSK modulation requires a higher signal reserve. Personally, I would choose the position 9 ° E where is 6ter HD. 10 ° E where the Kurdistan TV HD and Kurdistan 24 HD channels are QPSK modulated, but the DVB-S2 standard and the combination with high FEC 4/5 and 8/9 require an even higher signal reserve on the end viewer's side. I would also play with fine-tuning the SKEW LNB and sliding the LNB forward, backward. For the 10 ° E position, I would use a second dish.

Well, NEXT problem:
There used to be TVE Internacional FTA or 24h TVE FTA on several satellites. NOW I cannot find any on ASTRA 1KR/L/M/N or Hotbird 13B/C/E or ASTRA 2E/F/G or Hispasat 30W or Eutelsat 9b/10a or they don't work! Any solution?
Thank you.

 

[Analoguesat]

Its on 13E 12303V in HD

 

[brother9]

Well, it in my list, so the tuner DID find it in the past.
Oval dish with 6 LNBs; 13E is centre. I get DVB-S2 QPSK on most LNBs, but on Hotbird I get no signal or just a flash at 34%. I DO get BBC-Persian on 12322 DVB-S.
What is wrong?
I have not been up on to the roof yet this year, Just one LNB with problems?

 

[Adam792]

The strength of 12303V on 13°E has been noticeably weaker on my set-up recently. My dish does need adjusting, but it’s marginal lock even in clear weather now even though the surrounding TPs come in OK.

 

[manic01]

In my location SW UK using TD110 dish and TM5402 12303 is 97%

 

[Adam792]

Yeah I'm only using a zone 2 Sky dish with 13°E offset from 19.2°E. The LNB bracket moved slightly in the winds a few weeks ago too I think. At the fringes 12303V is definitely weaker than some of the surrounding transponders though as I've lost that while the others still have a bigger margin and often a few dB higher SNR, taking into account modulation differences that change the level needed to lock.

A bizarre thing about TVE Internacional is that they're transmitting it as full HD (1920x1080i), but it's a dreadful SD upscale, and even the on-screen logo indicates that it's SD! (TVE also add 'SD' on the SD versions of their domestic channels now rather than 'HD' on the HD ones).

 

[pontiend]

Fine here in South Yorkshire 89% 12.8dB
tbs 6983 100 cm Dish

 

[Fisty McB]

I've noticed this transponder on HotBird (12303 V) suddenly disappear on my setup on at least two occasions in recent months, to become available again a couple of hours later. A sudden drop in transmitted power of the transponder would be one explanation for this.