New NS2000 (NS3 / NS4) thread

[ralf111]

yes it will took a while

 

[ralf111]

do youy have ASI RECEIVER ?

 

[moonbase]

first question, is the only way to turn it off by using the switch on the wall?

Wall switch is the only way, no power on/off button on these.

 

[itchybag]

setup on 7e 11200 h or v 34285

ive got to chop a few trees and get a bigger dish first 13-7e blocked

 

[ralf111]

YES ORGINALL WAY IS THE WALL POWER SWITCH ON THE BACK

 

[itchybag]

Wall switch is the only way, no power on/off button on these.

thanks wasnt sure. Some hardware likes to shut down and keep fans spinning to cool the internals down

 

[ralf111]

Did you powered in ?

 

[ralf111]

is it any message on front panel ?

 

[ralf111]

switch it on it will take about 3 minutes

 

[ralf111]

of course is ok

 

[moonbase]

ive got to chop a few trees and get a bigger dish first 13-7e blocked

To get anywhere with these NS3000 units you need line of sight to 7E and 10E plus some type of device that has an ASI input to accept the ASI output from the NS3000.
I suppose you could go TSoIP rather than ASI but that would depend on the hardware configuration.

 

[ralf111]

did you locked ? on any ns3/ns4 feeed ?

 

[moonbase]

did you locked ? on any ns3/ns4 feeed ?

I dont think they have line of sight to 7.0E, 10.0E or 13.0E yet.
They said they needed to cut some trees?

 

[ralf111]

maybe not

 

[ralf111]

o common there is a mux on 7e

 

[ralf111]

11200 v nor h 34285

 

[ralf111]

and there is another mux DrM PROTECTED simite s add by bisss by theyr still exist

11220 on 10e 34295

 

[moonbase]

7.0E
11221H and 11221V, both NS3, both SR of 34285

 

[itchybag]

Did you powered in ?

yeah, logged in fine after changing ip, no mention of drm in the license list. got an old dektec card, not even sure it will work on windows 10. only got the NS as it was at cracking price. Didnt want to get everything else then fine ns unit prices were through the roof.

 

[ralf111]

on 10e or 7 e