OCTAGON SF8008 E2 4K UHD

[EnoSat]

11330H - you must enter the appropriate PLS
11422H - not suitable for E2
11492V - required at least 11dB

 

[statalite]

11330H - you must enter the appropriate PLS
11422H - not suitable for E2
11492V - required at least 11dB

11330H - new image, PLS entered using remote control, no signal in DefineOS. 13dB signal using Open ATV.
11422H - I don't know why not suitable for E2, I will forget for now.
11492V - new image, PLS entered using remote control, no signal in DefineOS. 11.5dB signal using Open ATV.

Adding new transponders 11330H and 11492V with the remote control with just the PLS code isn't working, the receiver doesn't recognise the signal, I think because not all of the required parameters are recorded satellites.xml, lamedb etc. I tried using editors to change satellites.xml with no luck because the contents are reset by the receiver.

Does it work for you?

 

[EnoSat]

11422H - The Si216x cannot process the mode used
11492V - I don't have enough signal for LOCK

Used FW - 1.06.51

 

[statalite]

View attachment 158192View attachment 158191View attachment 158190View attachment 158189View attachment 158188View attachment 158187View attachment 158186
11422H - The Si216x cannot process the mode used
11492V - I don't have enough signal for LOCK

Used FW - 1.06.51

Many thanks, I now have some progress.
I'm using the previous version of Define 1.06.47 but maybe it doesn't matter.

11330H - I can now scan this in! I was using ID 174526 but now I have changed the entry to 242965. All the main websites that list transponders say Gold 174526, what type of code is 242965, is this unique to Define?

11422H - Understood.
11492V - I think I need to change the code but I don't know how to get the new code?

 

[EnoSat]

ROOT

Free GOLD to ROOT / ROOT to GOLD conversor

 

[statalite]

ROOT

Free GOLD to ROOT / ROOT to GOLD conversor

Success with 11492V now also, thank you.