OCTAGON SX88 H.265 HEVC HD

Mooncamm

Member
Joined
Nov 20, 2017
Messages
87
Reaction score
36
Points
18
Age
66
My Satellite Setup
1 metre Gibertini dish, Octagon SX88 Receiver
My Location
Lincolnshire
Not wishing to trawl back over the Thread, but can anyone confirm the SX88 copes adequately with a big-standard H-H Motor?

I know it's specified, but these tiny boxes remind me of some PC cards in that the current sourcing available for a Motor might not exactly be generous.
I have tried my SX88 on my Stab motor and I get glitches with it. When I use the same Stab motor with my Technomate 5403 M3 it works perfectly with no messing about. Hope this helps.
 

Lazarus

Retired Moderator
Joined
May 29, 2009
Messages
27,190
Reaction score
8,726
Points
113
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
Yes indeed - It confirms my fears.

Mind you, a light duty cycle should enable it to be managed.
 

stephan94

Specialist Contributor
Joined
Jun 30, 2008
Messages
936
Reaction score
1,531
Points
93
Age
67
My Satellite Setup
1.80 Channel master with 6 LNB KU KA C Band 1200 Laminas KU
Openbox SX6 and S3 Mini, Dr HD 15, GTCombo ; Octagon SF 4008 , TBS 6983
My Location
Bavaria
Hallo

Here an answer to this kind of question.
DXtv.de | alle sonstigen Receiver-Typen | octagon sx88
if you do not have access to this forum, here is what is written:
"Mit der neuesten Firmware dreht der Receiver meine DiseqC 1.2 Motoren jetzt richtig schnell." 23/09/2017
Translate in English:
With the latest firmware, the receiver turns my DiseqC 1.2 motors now really fast
 

Mooncamm

Member
Joined
Nov 20, 2017
Messages
87
Reaction score
36
Points
18
Age
66
My Satellite Setup
1 metre Gibertini dish, Octagon SX88 Receiver
My Location
Lincolnshire
Hallo

Here an answer to this kind of question.
DXtv.de | alle sonstigen Receiver-Typen | octagon sx88
if you do not have access to this forum, here is what is written:
"Mit der neuesten Firmware dreht der Receiver meine DiseqC 1.2 Motoren jetzt richtig schnell." 23/09/2017
Translate in English:
With the latest firmware, the receiver turns my DiseqC 1.2 motors now really fast

I have used two versions of software after that date and both have glitches and are not perfect like my Technomate 5403 M3 on the same Stab motor.
The SX88 has the darkest picture I have had in more than 30 years KU band satellite and the sound does not work live on most French channels on 5 west.
SX88 summary
Tracking the Clarke belt: Glitchy
Picture: Darkest picture of all receivers used in more than 30 years.
French live sound: Doesn't produce French live sound on 5 west - others receivers are perfect.

Its a cheap option and there are better receivers available that will track the Clarke belt without problems, have a far better picture and produce live French sound.
A couple a dozen software updates issued and glitchy motor drive, dark picture and lack of live French sound remain on the SX88. It is suitable as a reserve receiver and nothing more as other receivers are much better to use and better value for money. If anyone has doubt in what I say, then try them for yourselves and you will see.
 

stephan94

Specialist Contributor
Joined
Jun 30, 2008
Messages
936
Reaction score
1,531
Points
93
Age
67
My Satellite Setup
1.80 Channel master with 6 LNB KU KA C Band 1200 Laminas KU
Openbox SX6 and S3 Mini, Dr HD 15, GTCombo ; Octagon SF 4008 , TBS 6983
My Location
Bavaria
French live sound: Doesn't produce French live sound on 5 west - others receivers are perfect.
Its a cheap option and there are better receivers available that willproduce live French sound.
other receivers are much better to use and better value for money. .

I would like to know with which other receiver of the same price (75 € )you receive the French Multistream with or without sound? (I don't speak of the new edision primo IP)
 

Lazarus

Retired Moderator
Joined
May 29, 2009
Messages
27,190
Reaction score
8,726
Points
113
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
Not sure why the Edision should be excluded?

It does the job and is cheaper than the SX88, so really ought to be mentioned.
 

stephan94

Specialist Contributor
Joined
Jun 30, 2008
Messages
936
Reaction score
1,531
Points
93
Age
67
My Satellite Setup
1.80 Channel master with 6 LNB KU KA C Band 1200 Laminas KU
Openbox SX6 and S3 Mini, Dr HD 15, GTCombo ; Octagon SF 4008 , TBS 6983
My Location
Bavaria
Not sure why the Edision should be excluded?
It does the job and is cheaper than the SX88, so really ought to be mentioned.
Absolutely,
you're right but it's the only one.
I'm just referring to the mooncamm message where he talks about Technomate and other receivers
that do a better job than the Sx88 (especially with the multistreams).
I wanted he gives me his other solutions.
As for the quality of the image it is a question of taste,
but many people do not think the same thing as him, and find the image very good.
 

Lazarus

Retired Moderator
Joined
May 29, 2009
Messages
27,190
Reaction score
8,726
Points
113
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
Yes, I agree with you about there being an element of taste in how video is perceived.
 

william-1

Super Moderator
Staff member
Joined
Jul 2, 2005
Messages
12,277
Reaction score
12,349
Points
113
Location
Epping Forest
My Satellite Setup
OP Gibertini 100 XP+ Inverto Black Ultra Lnb
Superior Dark Motor (160° max)
(50 east to 45 west)
Octagon SX88+Optima (A/B switch) Edision primo IP S2

Raven 88cm Mesh Dish + IBU Twin output
Stab100 H to H (120° max)
(53 east to 45 west)
Octagon SX88+ Ultra HD (A/B switch) Golden Interstar Alpha_X
My Location
Epping Forest Essex
I rarely use the TM5402HD M3 as the video is very poor in comparison with the M1 & M2 versions I did complain to Technomate so they added more video controls but it was still poor & they never fixed the data base problems after a few weeks of use the M3 adds hundreds of dead transponders that is a nightmare when I compile satellite charts o_O so I told them that I was not happy with the M3 as is made of cheap sourced parts in China & full of data base errors that need to be sorted out but it seems that quality is not a priority at TM these days:eek:

The M1 & M2 were made of higher quality parts in Korea with very few data base problems so I use these to compile my TM5402HD channel lists,

The support has now finished for these receivers that could have been much better the TM6902HD was probably the best receiver that they made,

As for the SX88 the video is excellent the support is very good & I will probably get the SX88+ to replace some of my older receivers :)
 

Pierangelo

Regular Member
Joined
Apr 24, 2015
Messages
202
Reaction score
67
Points
28
Age
50
My Satellite Setup
150 cm from 80 east to 40 west + C lnb
My Location
Italy
Dear Andy,
GOD bless You!!!

Bit stream.... And now I Can hear!!!!!!!

:-clap:-rofl2
 

el bandido

Member
Joined
Feb 25, 2009
Messages
129
Reaction score
154
Points
43
Age
61
My Satellite Setup
1.2 meter KU band
3.6 meter C band
Enigma2 Receivers
My Location
Atlanta, Ga. USA
Here is a screencap of the SX88 serial output. You can get lots of information about a device from the serial terminal. No new info. Just thought someone might want to see it.

SX88_Serial.png
 

noggin

Member
Joined
Feb 4, 2010
Messages
4
Reaction score
4
Points
3
Age
52
My Satellite Setup
Win 7 32bit HTPC - Gigabyte E7AUM-DS2H - 4GB RAM - Hauppauge Nova-S2 HD DVB-S2 - Pinnacle 7010ix 2xDVB-T 2xDVB-S - DVBLink v2 - 28.2/28.5E and 1W 5E Monoblock planned
My Location
Berkshire
Just to say - running the SX88 over HDMI into my Onkyo TX-NR616 AVR with bitstream rather than PCM digital audio output enabled on the SX88 I have no issues with DD+ on the French channels at 5W.

The Onkyo AVR displays a DD+ logo and decodes the audio fine.

Looks as if the main limitation is the internal decoder in the receiver isn't enabled to decode DD+ audio to PCM to feed to a TV (or non-DD+ compatible amp?)
 
Last edited:

Pierangelo

Regular Member
Joined
Apr 24, 2015
Messages
202
Reaction score
67
Points
28
Age
50
My Satellite Setup
150 cm from 80 east to 40 west + C lnb
My Location
Italy
In my case, it is the tv 4k to do the job.....:)
 

stephan94

Specialist Contributor
Joined
Jun 30, 2008
Messages
936
Reaction score
1,531
Points
93
Age
67
My Satellite Setup
1.80 Channel master with 6 LNB KU KA C Band 1200 Laminas KU
Openbox SX6 and S3 Mini, Dr HD 15, GTCombo ; Octagon SF 4008 , TBS 6983
My Location
Bavaria
Octagon_sx88_v1.04.48_20180301_EU NEW SW - 01 03 2018

SW Update: Menu - Settings - SW Firmware Update: USB - Red Button : OK

English:
--------
- Update CAS Database
- Added stalker global parental lock for ADULT category , no need pw for every channel (PW: 0000)
- Added iptv more subtitle format support
- Improved stalker channel list moving speed
- Stalker: hidden URL ****, Unlock Password: 6969
- Menu - Settings - Misc Settings:
- Rename Portal to Portal 1,2,3,4 Stalker for Autostart and F1, F2, F3, F4

Download OCTAGON_SX88_SW_EU_V10448_010318.rar (28.84 MB) now. Fast and easy at workupload.com
 

william-1

Super Moderator
Staff member
Joined
Jul 2, 2005
Messages
12,277
Reaction score
12,349
Points
113
Location
Epping Forest
My Satellite Setup
OP Gibertini 100 XP+ Inverto Black Ultra Lnb
Superior Dark Motor (160° max)
(50 east to 45 west)
Octagon SX88+Optima (A/B switch) Edision primo IP S2

Raven 88cm Mesh Dish + IBU Twin output
Stab100 H to H (120° max)
(53 east to 45 west)
Octagon SX88+ Ultra HD (A/B switch) Golden Interstar Alpha_X
My Location
Epping Forest Essex
Latest software was not fully tested when issued & has several faults,

Do not use the latest software:-
March 7, 2018
New firmware OCTAGON SX88 H.265 HEVC HD V10450 - 07.03.2018
Download Firmware V10450

Going to edit channels leads you to weather in your region as do several other selections,

Last good software download working ok here is 1.04.48
 

william-1

Super Moderator
Staff member
Joined
Jul 2, 2005
Messages
12,277
Reaction score
12,349
Points
113
Location
Epping Forest
My Satellite Setup
OP Gibertini 100 XP+ Inverto Black Ultra Lnb
Superior Dark Motor (160° max)
(50 east to 45 west)
Octagon SX88+Optima (A/B switch) Edision primo IP S2

Raven 88cm Mesh Dish + IBU Twin output
Stab100 H to H (120° max)
(53 east to 45 west)
Octagon SX88+ Ultra HD (A/B switch) Golden Interstar Alpha_X
My Location
Epping Forest Essex
Then the menu needs modifying when I press edit channels I do not expect to go to the weather app.
 

stephan94

Specialist Contributor
Joined
Jun 30, 2008
Messages
936
Reaction score
1,531
Points
93
Age
67
My Satellite Setup
1.80 Channel master with 6 LNB KU KA C Band 1200 Laminas KU
Openbox SX6 and S3 Mini, Dr HD 15, GTCombo ; Octagon SF 4008 , TBS 6983
My Location
Bavaria
I do not understand,
for me everything works properly.
 

william-1

Super Moderator
Staff member
Joined
Jul 2, 2005
Messages
12,277
Reaction score
12,349
Points
113
Location
Epping Forest
My Satellite Setup
OP Gibertini 100 XP+ Inverto Black Ultra Lnb
Superior Dark Motor (160° max)
(50 east to 45 west)
Octagon SX88+Optima (A/B switch) Edision primo IP S2

Raven 88cm Mesh Dish + IBU Twin output
Stab100 H to H (120° max)
(53 east to 45 west)
Octagon SX88+ Ultra HD (A/B switch) Golden Interstar Alpha_X
My Location
Epping Forest Essex
I will stay with my current software version as it does all I want it to,

Maybe you can answer these questions that I have about future software stephan94

Software issued so far is very good especially the multi-stream there is any chance of getting the transponders in sequence in the database?

Are there any plans to reconfigure the blind scan so that I can select the part of the Ku band that I want to scan?

Feeds on 7 East mixed with Broadcasting Channels on 7 east & 10 east feeds mixed with Broadcast channels on 9 east,

Overall this is one of the best new receivers that I have tested in the last 25 years
clear.png
:)
 

RustySpoons

Sleepy Hollow
Joined
Jan 31, 2018
Messages
2,345
Reaction score
1,278
Points
113
Age
43
My Satellite Setup
50E - 30W
2x CM 1.2m Polar Mount/Jack
65E- 65W
Gibertini 1m OP100 - STAB HH100 - Inverto Black Ultra 0.2 Twin
Mutant HD51
Edision Primo IP S2
Dreambox DM800HD
Venton Unibox HD2
Sony Bravia 55" 4K
My Location
South Wales
Maybe you need to reset to factory defaults after a flash as sounds like the config tables have changed?
 
Top